Blind development of oversupply causing waste
According to incomplete statistics, during the “10th Five-Year Plan†period, China imported a total of 3,500 sets of plastic packaging materials and production lines. The excessive number of plastic packaging materials caused excessive production capacity, which caused the oversupply of production capacity, especially biaxially stretched films. BOPP has introduced 70 sets of production lines, which is equivalent to the number of imported sets in the past. In 2005, the production capacity reached 1.93 million tons, and the output was only 1.66 million tons; BOPET built more than 20 production lines of 10,000 tons, and the new capacity was 550,000 tons, and the output was only 330,000 tons; BOPA2003 Before the year, the production capacity has been maintained at 6,000 tons. In the past two years, 12 companies across the industry have introduced 17 production lines with a capacity of 70,000 tons. At present, the market only needs 2-5 million tons. Many companies have spent tens of millions of yuan or even more than 100 million yuan on the introduction of production lines. The date of production is when production stops. Business pressure is very high. The main reason for this situation is that there is a lack of overall planning and effective control over the development of the industry in the macro industry. In particular, the introduction of equipment with large production capacity and unit price of nearly RMB 100 million in the industry should be strengthened in terms of regional arrangement and total control. Demonstration and effective supervision.
Because it is extensive operation, which companies have the money to introduce, seeing other people introduce themselves to the same import, this kind of swarming approach to form similar products, in a limited market, mutual reduction in price and slaughter, disorderly competition, which is an urgent need in the current industry solved problem.
Lack of independent and independent innovation capabilities and development potential <br> Due to lack of funds, corporate science and technology investment is very small, weak development capacity, awareness is not strong, most companies place their technological advancement in the introduction of equipment or copied copy of others' new products. Industry usually imports technology and equipment from generation to generation from abroad. From the industry to the enterprise, no independent and independent innovation capability has been established, no scientific and technological service system has been established, no research on the technology development policy of the enterprise, no research on the development direction of the product from the combination of economy and technology, and no organization force on the introduction. Equipment and process technologies are carefully digested and absorbed. Indirect innovation and independent innovation have made the development of the industry lack of stamina. To achieve stable, rapid, and healthy development in the end, it can only be on paper.
Policies and regulations lag behind the development of the industry <br> Plastic packaging materials industry, the widespread use of renewable materials, fillers produce counterfeit and shoddy products, there toxic packaging products, environmental pollution caused by plastic waste and the market price and mutual competition, vicious competition The production development is in the chaos of letting go of its own, not only disrupting the market, harming the interests of consumers, but also causing environmental pollution and affecting the healthy development of plastic packaging equipment companies and industries. One of the main reasons is that there is a lack of effective management tools and strong policy interventions and legal penalties. The formulation of current policies and regulations obviously lags behind the development of production and industry. Up till now, the plastic packaging materials industry has not yet had an industry management regulation. The management of waste recycling has yet to be improved and supplemented. This is a major flaw in the development of the industry, resulting in the rapid increase in the production technology and industry management level of plastic packaging equipment.
Copper Plating Production Line
Metal electroplating line is widely used in aircraft and auto parts, machinery parts, metal, hardware processing industries, including cooper plating, silver plating, zinc plating, nickel plating, gold plating, chrom plating, anodizing, electrophoresis production line,etc.
Copper plating is one of the most widely used pre-plating layers in the electroplating industry, including soldering parts, lead-tin alloys, and zinc die-casting parts that must be plated with copper before nickel, gold, and silver are plated to improve the bonding force of the plating.
Copper plating is an important part of the protective decorative plating copper/nickel/chromium system. The flexible copper plating with low porosity plays an important role in improving the adhesion and corrosion resistance of the plating.
In order to complete the collective name of all electroplating equipment in the electroplating process of industrial products, the electroplating process must be completed in sequence. The Electroplating Production Line is also called the electroplating assembly line.
Copper Plating Production Line,Copper Plating Line,Copper Electroplating Line,Automatic Copper Production Line
Wuxi Xingyi Intelligent Environment Protection Equipment Co.,Ltd. , https://www.wxxingyi.com