Model NO.: ML100
Customized: Customized
Certification: CE, UL
Condition: New
Motor Brand: Siemens, ABB, Weg or Chinese Best Brand
Screw & Barral Material: 38CrMoAl, Bimetallic, Nitrogen Treatment
Heating Method: Electrical Heating, Electromagnetic Heating
Material of Heater: Cast Aluminium, Cast Copper, Mica, Ceramic Heater
Cooling Method: Air Cooling
Degassing: Vacuum Degassing, Natural Degassing
Cutting Method: Die Face Cutting, Pulls Strap Cutting Method
Voltage: 380V50Hz or Custmized
Control Method: Inverter/Frequency
Guarantee: 12months
Trademark: PURUI
Transport Package: Standard Export Packing
Specification: 7000mmx2500mmmx3000mm
Origin: Zhangjiagang City
HS Code: 84772010
IntroductionΔ Material: PE/PP film, PP Woven/sack Bag, Printed BOPP film
Δ Capacity: 60-800KG/HR
Δ Finial pellet size: Φ 3mm× 3mm
Work steps
1. Feeding: as standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls' scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor's room is. Metal detector can be combined with belt conveyor, and can interlock with control system, to warn and stop the system, in case that metal is found in feeding section.
2. Crushing and compacting: the rotatory blades of compactor will cut up incoming scraps. Frictional heating which caused by high speed rotatory blades will heat and let scraps shrinking just below their agglomerating point. Optimal designed guide structure compacts the material and directs it into extruder screw. Crushes, dries and compacts the material which enables a fast and stable feeding from the compactor directly into the extruder.
3. Plasticization and degassing: A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 32 to 34D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with some water content.
4. Melt filtration: a regular single-plate/ piston double-station screen changer or non-stop double-plate/ piston four-station can be installed on head of extruder to present significant filtration performance. The requirements on the filter technology depend heavily on the quality of the input material as well as the planned use of granules.
5. Pelletizing: die-face water ring pelletizing system set as the standard granulating method in MLsystem. Self-adjusting pelletizing head for the best granulate quality and long uptime thanks to consistently correct blades pressure. RPM of rotatory blades is automatic based on melt extruding pressure. Advanced dewatering vibration sieve combining with horizontal-type centrifugal dewatering present high performance dried pellets.
Final pellets(PE film)
Main technical parameter
Model | ML85 | ML100 | ML130 | ML160 | ML180 | |||
Output | PP | 120KG | 250KG | 400KG | 600KG | 800KG | ||
HDPE | 150KG | 300KG | 500KG | 700KG | 1000KG | |||
LDPE | 180KG | 400KG | 600KG | 800KG | 1200KG | |||
Machine weight | 4000KG | 6000KG | 8000KG | 12000KG | 15000KG | |||
Total power | 140KW | 215KW | 325KW | 420KW | 590KW | |||
 Compactor/agglomerator |
Compactor diameter | φ800mm | φ1000mm | φ1200mm | φ1300mm | φ1500mm | ||
Blade(rotary/stable) | 6/5 | 6/12 | 9/12 | 9/13 | 12/15 | |||
Motor | 37KW | 55KW | 90KW | 110KW | 160KW | |||
Extruder | Type | The degassing zone is designed by properties of different material | ||||||
Screw diameter | φ85mm | φ100mm | φ130mm | φ160mm | φ180mm | |||
L/D | 33/1 | 33/1 | 33/1 | 30/1 | 30/1 | |||
Screw rotary speed(RPM) | 0-120 | 0-120 | 0-120 | 0-120 | 0-120 | |||
Barrel heating power | 24KW | 35KW | 54KW | 75KW | 120KW | |||
Barrel cooling method | BY AIR | BY AIR | BY AIR | BY AIR | BY AIR | |||
Temperature control zone | 0.3KWx4 | 0.3KWx5 | 0.5KWx5 | 0.5KWx5 | 0.5KWx6 | |||
Motor power | 55KW | 90KW | 132KW | 185KW | 250KW | |||
Screen changer | Type | Two position plate hydraulic screen changer(without stopping machine and will not influence the final output) | ||||||
Heating | 7KW | 10KW | 16KW | 20KW | 30KW | |||
Temperature control zone | 1 | 1 | 1 | 1 | 1 | |||
Oil pump | 1.5KW | 2.2KW | 3KW | 3KW | 3KW | |||
  Die & cutting system |
Die mode | Round shape die plate | ||||||
Heating power of die | 5KW | 6KW | 10KW | 10KW | 10KW | |||
Cutting method | Die face cutting system | |||||||
Cutting motor power | 1.5KW | 1.5KW | 2.2KW | 2.2KW | 2.2KW | |||
Temperature control zone | 1 | 1 | 1 | 1 | 1 | |||
Water pump | 2.2KW | 3KW | 4KW | 4KW | 4KW | |||
Power of centrifugal dryer | 2.2KW | 3KW | 4KW | 5.5KW | 7.5KW |
In order to match your requirement and provide you a proper quotation, please advise:
• What material do you want to recycling? PE film? PP woven bag? HDPE/PP bottle? or other plastic?
• What capacity(kg/h) do you want?
• What is the final size(mm) of granules you want?
• Other special requirements about the PE plastic pelletizing machine you want.
Our service:
Before-sale
• Introduce products in detail  Â
• Recommend suitable solution  Â
• Offer test
During manufacturing
• Provide layout and engineering conditions  Â
• Offer screw plan and related documents
• Inform the project processing status  Â
• Insure the product designed in accordance with technical document
After-sale
• Provide installation, commissioning and training  Â
• Offer spare parts
• Provide necessary technical support and update information
Feel free to contact with me if you want to learn more information.
Contact persion:Ms. Laura
Mob.:86 15962366319
Clutch Release Bearing For Chinese Trucks
Clutch Release Bearing For Chinese Trucks,Clutch Release Bearing Parts,Clutch Bearings,Clutch Release Throwout Bearing
Hangzhou Kangxin Bearing , https://www.cnkxb.com