Artificial climate incubator steps

Artificial climate incubator steps
In the process of plant growth, it is inseparable from light, temperature and humidity. However, these are variable in nature. Many manufacturers now produce and develop an environment that can be regulated by plant growth. Our company also develops and produces smart artificial climate chambers and artificial climate incubators for plant growth. A perfect environment. Here's how it is used routinely:
Users are required to set 12 hours of daytime, temperature 20°C, humidity 75% RH, light intensity 66%; night time 12 hours, temperature 10°C, temperature 65% RH, light intensity 0; over-temperature protection 25°C.
Step 1: After power-on, press the SET/CHECK button. The day indicator “DAY” is on. At the same time, each indicator window flashes and enters the daytime setting status: Press the plus/minus button under the TIME SET button to display the time indicator window. "12";Press the TEMP SET key to increase or decrease the key to the temperature indicator window to display "20"; adjust the humidity/illumination setting key to the humidity/lightness indicator window to display "75"; click the humidity/illuminance switch key The "I.D" indicator light is on; the humidity/lightness setting key is adjusted to "66" on the humidity/lightness indication window.
Step 2: Press the fifth SET/CHECK button again, and the night indicator “NIGHT” will be on. At the same time, each indicator window flashes and enters the night setting state. Repeat the operation described in step 1 to input relevant data;
Step 3: Once SET/CHECK is pressed again, the setting is completed, and the system returns to the running state. The system starts to cycle according to the set parameters. (When one cycle is completed, the cycle indicator window is displayed as “1”; In 2 cycles, the cycle indicator window shows "2"... If "30" cycle is displayed, as long as it is not turned off, it will return to display "1" to "30", so it repeats the cycle until shutdown;
Step 4: Set the over-temperature protection through the high-temperature limit dial on the control panel, generally adjusted to be more than 5°C higher than the working humidity (such as: the working temperature within the box is 20°C, the minimum temperature setting is 25.0°C ).

Flake ice is widely used in the following field.

●  Seafood Processing

●  Meat Processing

●  Fresh Preservation

●  Concrete Cooling

●  Snow Making

●  Medical Facilities

●  Supermarket

●  Environmental Engineering

 

Snoworld flake ice production capacity (tons/24 hours) is 0.5, 0.75, 1, 1.2, 1.6, 2, 2.5, 3, 5, 6, 8, 10, 15, 20, 25 and 30. The ice flake thickness is within the range of 1.5 to 2.2 mm. The ice flake comes out dry with a low temperature is around -7 C degree. Thus, it is not easy to melt and get lumped. Both fresh water and sea(brine) water can be used for ice making, and both environment of on land and on board is suited.

 

Snoworld Flake Ice Machine has several features.


●  Designed and manufactured under the pressure vessel standard, thus making this product durable, safe and reliable.

●  Optimized system design ensures the machine work stably with a low failure rate.

●  Complete product series to meet different application.

●  With CE(PED)/ASME certificate.

Flake Ice Machine

Flake Ice Machine,Commercial Flake Ice Machine,Industrial Flake Ice Machine,Flake Ice Making Machine

Fujian Snowman Trade Co., Ltd. , http://www.sinoicemachine.com