After the winter temperature has continued to drop, the hot car of a commercial vehicle is gradually becoming extremely important. But now many drivers are less knowledgeable about how hot cars should be heated and how long it takes to get a hot car. Although many people use different methods to get a commercial vehicle to get a hot car, basically the same objective is achieved.
Some drivers say that the technology of the vehicle has improved so well. Can such a troublesome step of the hot car be omitted? Many commuters drove away after a night’s vehicle started in order to hurry. This kind of operating habits is very bad, that is, the comparative fuel consumption will also impair the performance of the engine. Because after the commercial vehicle has experienced a night of standing, the residual pressure of the lubricant on each friction surface will disappear, and the protective effect of oil film will be lost. At low temperatures, the viscosity of the lubricant will be made. Increased, with the liquidity and adhesion are also the same will be worse. Therefore, if a hot car is not driven by a commercial vehicle, it will be an extremely harmful operation for the engine. After starting the commercial vehicle's development machine at a low temperature, the accelerator will immediately step on the accelerator, because its temperature is still low, and the atomization of gasoline will be insufficient, making it impossible to obtain good results. The burning will cause more serious carbon deposition.
How long does it take to get a hot car, minutes or tens of seconds? And this question is still not concrete and specific, because now the models in the auto market are constantly improving the technology, so the current hot time of new commercial vehicles should be shorter than those of the old models. Time. In fact, you can also refer to the two standards as the standard for hot cars. One is the speed of the commercial vehicle engine, and the other is the water temperature. Because at the time of idling hot car, it is all necessary to return the engine speed of the commercial vehicle to the normal idling operating standard. Generally, the idling speed of the vehicle with the idling condition is about 800. The other one is watching. After the water temperature above the dashboard has changed, you can step on the throttle to drive.
Special For Laser Cutting Machine Compressor
Electric Compressor,Laser Cutting Air Compressor,Laser Cutting Screw Air Compressor,Electric Laser Cutting Air Compressor
Ningbo Xinda Screw Compressor Co., Ltd. , https://www.augustcompressor.com