Wing gates need to pay attention to three major problems during use

The wing gate manufacturers share the three major problems in the use of the wing gate: in the process of using the wing gate, the wing gate is in the process of passing, and the wing gate is in the process of failure.

The wing gate machine automatically adjusts the hydraulic shock absorber with its unique use. In the practical process, it effectively reduces the noise and impact problems during the running process. In order to take advantage of the advantages of the wing gate and the convenience of the wing gate, in the course of use, the following principles must be observed:

During the use of the wing gate, the process of swiping outside the yellow line is carried out. You can enter when the wing gate opens to a certain extent and there is an indication of the arrow. Do not stay in it. Easy to improve the smoothness of the channel

During the passage of the wing gate, it must not enter the channel of the wing gate. Don't squeeze it inside to do the card swiping action, so as to avoid the phenomenon that the gate cannot be opened. When the gate of the wing gate opens to a certain extent, be sure to remember to perform the card swiping operation.

When using the wing gate, if there is any abnormal situation, if the power is cut off in time, immediately inform the wing gate after-sales department.

Wing gates also need to be maintained frequently. Don't think that it is omnipotent. Regularly carry out dust inside and outside the chassis. Make sure the equipment is working properly.