Why does the wireless bridge set up the antenna?

A friend who has been in contact with a wireless bridge probably knows that a wireless bridge requires an antenna. Whether it is a built-in antenna or an external antenna, an antenna is always needed. So why do wireless bridges need antennas, what is the role? How to choose the right antenna?

Wireless bridge signal transmission principle: The RF signal power output from the transmitting bridge is transmitted to the antenna through the feeder (cable), and then radiated by the antenna in the form of electromagnetic waves. When the electromagnetic wave reaches the receiving location, it is received by the antenna and sent through the feeder. Go to the receiving bridge. It can be seen that the antenna is a transmitting device of the wireless bridge signal. Without the antenna, the signal of the wireless bridge cannot be transmitted, and there is no radio communication.

There are many kinds of antennas for different frequencies, different uses, different occasions and different requirements. According to different installation methods, it can be divided into built-in antenna and external antenna; according to different signal transmission directions, it can be divided into directional antenna and omnidirectional antenna; according to different frequencies, it can be divided into 2.4G antenna and 5.8G antenna... so many Antenna type, how to choose?

First, the built-in antenna and external antenna

1, built-in antenna

Because the antenna and the device are integrated, the volume is small and the installation is convenient. Generally, it is used in a short-range wireless transmission system, and the built-in antenna can be generally used within 5 kilometers. In addition, the gain of the built-in antenna is generally small, and the transmission distance is relatively close.

2, external antenna

The external antenna is generally large. If the transmission distance is relatively long, such as 10 km or more, a high-gain external antenna is recommended. Generally, when multiple transmissions (point-to-multipoint) are used to transmit video signals, if the reception angle needs to be increased, an external antenna can be used, because the angle of the internal antenna is relatively small, which is not suitable at this time.

Second, directional antennas and omnidirectional antennas

1, directional antenna

It is expressed in a certain angle range on the horizontal pattern. The main radiation range is like an inverted and incomplete cone. It is generally used in environments with long transmission distance, small coverage, high target density and high frequency utilization. The signal from the directional antenna can only be passed to the front. The purpose of using directional transmit antennas is to increase the effective utilization of radiated power, increase confidentiality, and increase anti-interference ability.

2, omnidirectional antenna

That is to say, in the horizontal direction diagram, 360Â° is uniformly radiated, and the radiation range is more like an apple, and has no directionality, and is generally applied in an environment with a short transmission distance and a large coverage. The signal of the omnidirectional antenna is transmitted in all directions, and the price is cheap, and the gain is relatively small, generally below 9dBi.

Third, 2.4G antenna and 5.8G antenna

The choice of frequency is relatively simple, depending on the frequency of the wireless bridge. If the wireless bridge is 2.4G, the 2.4G antenna is selected; if the wireless bridge is 5.8G, the 5.8G antenna is selected. Never use a 2.4G antenna for a 5.8G bridge or a 5.8G antenna for a 2.4G bridge, which will result in the inability to transmit signals.

The use of wireless bridges and antennas is very flexible, and different devices and antennas can be selected according to different environments, different point distributions, and different transmission distances.

Wire Rope

Tower Crane wire rope is usually used on the tower crane hoisting mechanism, trolleying (luffing) mechanism and slewing mechanism. BQ could provide all models of Wire Rope for Tower Crane. The diameter of tower crane steel wire rope could be 12mm, 14mm, 16mm, 18mm, 20mm, 22mm. 16mm Wire Rope could be used for 12-14 ton Tower Crane. 18mm Steel Wire Rope could be used for 16ton tower crane. Tower crane wire rope could be galvanized wire rope, Non-Rotating Wire Rope, bright wire rope, stainless steel wire rope. Wire Rope Wedge is used for fixing or connecting the wire rope of tower crane.

Wire rope is an essential component of tower cranes as it provides the necessary strength and flexibility to lift heavy loads. Tower cranes typically use high-strength steel wire ropes that are specifically designed for heavy-duty lifting applications.

The wire rope used in tower cranes is typically made up of multiple strands of steel wires twisted together to form a strong and durable rope. The number of strands and wires in the rope can vary depending on the specific requirements of the crane.

Tower crane wire ropes are designed to withstand high loads and provide excellent resistance to abrasion, fatigue, and corrosion. They are also engineered to have a high breaking strength to ensure safety during lifting operations.

Regular inspection and maintenance of the wire rope is crucial to ensure its safe and efficient operation. This includes checking for signs of wear, corrosion, or damage, as well as lubricating the rope to reduce friction and prolong its lifespan.

Overall, wire rope is a critical component of tower cranes, providing the necessary strength and reliability to handle heavy lifting tasks in construction and other industries.

Steel Wire Rope,Tower Crane Wire Rope,Galvanized Wire Rope,Stainless Steel Wire Rope,Steel Rope

SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.syconstructionhoist.com