Used Metal Glazed Tile Roll Forming Machine with Taiwan Quality and China Price

Posted on

Model NO.: YX55-255-765
Working Material: Galvanized Sheet(Gi),Cold Roll Steel(CRC),Hot Roll
Thickness: 0.4-0.8mm
Yield Strength: 245-550MPa
Decoiler: Manual/Hydraulic for Options
Housing: H350 Beam
Side Wall Thickness: 16mm
Shaft: 75mm/85mm
Forming Station: 14
Cutter Material: Cr12 Tool Steel
Output: About 4-8meters Per Minute
Trademark: BMS
Transport Package: Naked and Covered by Plastic Film Into Container
Specification: 7800*1500*1600mm
Origin: China (Mainland)
Model NO.: YX55-255-765
Working Material: Galvanized Sheet(Gi),Cold Roll Steel(CRC),Hot Roll
Thickness: 0.4-0.8mm
Yield Strength: 245-550MPa
Decoiler: Manual/Hydraulic for Options
Housing: H350 Beam
Side Wall Thickness: 16mm
Shaft: 75mm/85mm
Forming Station: 14
Cutter Material: Cr12 Tool Steel
Output: About 4-8meters Per Minute
Trademark: BMS
Transport Package: Naked and Covered by Plastic Film Into Container
Specification: 7800*1500*1600mm
Origin: China (Mainland)

Used Metal Glazed Tile Roll Forming Machine with Taiwan Quality and China Price
 

1. Details of glazed tile roof roll forming machine

Material
Material Thickness(&):0.4-0.8mm
Applicable material:Galvanized Steel Coils, Hot Rolled Coils,Cold Rolled Coils,yield strength 245Mpa or 550Mpa
Machine Components
1)Manual Decoiler: one set
Max. feeding width: 500mm, coil ID range 470mm±30mm

Capacity: Max. 3Ton                            

 

2)   Cold Rolling Mills:

Rollers manufactured from bearing steel GCr15,precision machined,hard Chrome Coated with thickness 0.04mm(for longer life and anti-rust)   ;    

 

                    

Motor Driving,Gear chain transmission, 14 forming stations and 7 rollers(3 upper rollers and 4down rollers)for straightening and levelling)

Main Motor=5.5KW  , Frequency speed control
Forming speed approx.4-8m/min
3)Hydraulic Cutting device
hydraulic motor: 5.5KW, Hydraulic pressure range: 0-12Mpa
Cutting tool material: Cr12, Heat treatment
4)PLC Control System(Touch screen brand:Taiwan WEINVIEW,Inverter brand:Finland VOCAN/Denmark Danfoss ,Encoder brand: Japan Koyo)
Control the quantity and cutting length automatically
Combined with: PLC, Inverter, Touch Screen, Encoder, etc
Cut-to-length tolerance≤±1mm
Control Voltage 24V
5) Exit Rack Un-powered, two units             

2. Machine Features of glazed tile steel roof roll forming machine

The advantages of metal roof panel cold roll forming machineare as follows:

1.Easy operation, low maintenance cost
2.Material saving

3.Type of penel is wide used.

 

3. Detailed Images of glazed tile steel roof roll forming machine

Machine Parts

Name: Corrugated roof panel roll forming machine 

Brand: BMS 

Original: China

make the steel materials move more smoothly

Machine Parts

Name: Roof panel roll forming machine cutter 
Brand: BMS 
Original: China 
made by high quality mold steel Cr12Mov with heat treatment
Used Metal Glazed Tile Roll Forming Machine with Taiwan Quality and China Price
 

Machine Parts

Name: rollers 
Brand: BMS 
Original: China
Rollers manufactured from high quality bearing steel GCr15, CNC lathes, Heat Treatment.With black treatment or Hard-Chrome Coating for options.

 

Machine Parts

Name: PLC control system 
Brand: SIEMENS/SCHNEIDER ELECTRIC 
Original: Germany/France 
Combined with: PLC, Inverter, Touch Screen, Encoder, etc
Encoder: KOYO/Omron (Japan brand)

Used Metal Glazed Tile Roll Forming Machine with Taiwan Quality and China Price
 

 

Our Service                                                                                                                                                

Pre-Sales Service

* Inquiry and consulting support. 

* Profile drawing and roll forming solution. 

* View our Factory.

After-Sales Service

* Training how to instal the machine, training how to use the machine. 

* Engineers available to service machinery overseas.

Company Show

Used Metal Glazed Tile Roll Forming Machine with Taiwan Quality and China Price
 

                                                       

Factory Show

Used Metal Glazed Tile Roll Forming Machine with Taiwan Quality and China Price

 

Used Metal Glazed Tile Roll Forming Machine with Taiwan Quality and China Price
 

1. Details of glazed tile roof roll forming machine

Material
Material Thickness(&):0.4-0.8mm
Applicable material:Galvanized Steel Coils, Hot Rolled Coils,Cold Rolled Coils,yield strength 245Mpa or 550Mpa
Machine Components
1)Manual Decoiler: one set
Max. feeding width: 500mm, coil ID range 470mm±30mm

Capacity: Max. 3Ton                            

 

2)   Cold Rolling Mills:

Rollers manufactured from bearing steel GCr15,precision machined,hard Chrome Coated with thickness 0.04mm(for longer life and anti-rust)   ;    

 

                    

Motor Driving,Gear chain transmission, 14 forming stations and 7 rollers(3 upper rollers and 4down rollers)for straightening and levelling)

Main Motor=5.5KW  , Frequency speed control
Forming speed approx.4-8m/min
3)Hydraulic Cutting device
hydraulic motor: 5.5KW, Hydraulic pressure range: 0-12Mpa
Cutting tool material: Cr12, Heat treatment
4)PLC Control System(Touch screen brand:Taiwan WEINVIEW,Inverter brand:Finland VOCAN/Denmark Danfoss ,Encoder brand: Japan Koyo)
Control the quantity and cutting length automatically
Combined with: PLC, Inverter, Touch Screen, Encoder, etc
Cut-to-length tolerance≤±1mm
Control Voltage 24V
5) Exit Rack Un-powered, two units             

2. Machine Features of glazed tile steel roof roll forming machine

The advantages of metal roof panel cold roll forming machineare as follows:

1.Easy operation, low maintenance cost
2.Material saving

3.Type of penel is wide used.

 

3. Detailed Images of glazed tile steel roof roll forming machine

Machine Parts

Name: Corrugated roof panel roll forming machine 

Brand: BMS 

Original: China

make the steel materials move more smoothly

Machine Parts

Name: Roof panel roll forming machine cutter 
Brand: BMS 
Original: China 
made by high quality mold steel Cr12Mov with heat treatment
Used Metal Glazed Tile Roll Forming Machine with Taiwan Quality and China Price
 

Machine Parts

Name: rollers 
Brand: BMS 
Original: China
Rollers manufactured from high quality bearing steel GCr15, CNC lathes, Heat Treatment.With black treatment or Hard-Chrome Coating for options.

 

Machine Parts

Name: PLC control system 
Brand: SIEMENS/SCHNEIDER ELECTRIC 
Original: Germany/France 
Combined with: PLC, Inverter, Touch Screen, Encoder, etc
Encoder: KOYO/Omron (Japan brand)

Used Metal Glazed Tile Roll Forming Machine with Taiwan Quality and China Price
 

 

Our Service                                                                                                                                                

Pre-Sales Service

* Inquiry and consulting support. 

* Profile drawing and roll forming solution. 

* View our Factory.

After-Sales Service

* Training how to instal the machine, training how to use the machine. 

* Engineers available to service machinery overseas.

Company Show

Used Metal Glazed Tile Roll Forming Machine with Taiwan Quality and China Price
 

                                                       

Factory Show

Used Metal Glazed Tile Roll Forming Machine with Taiwan Quality and China Price

 

Panel Pre-Filter Mesh

Panel Pre-Filter Mesh is mainly used to filter dust particles above 10 microns in the air, and is suitable for primary air filtration in central air conditioning systems and clean air conditioning systems.
Pre Panel Filter
1. The outer frame of the flat-type primary filter adopts a solid plate-type aluminum alloy frame, 10mm, 15mm, 17mm, 21mm and other thicknesses to choose from. A diamond-shaped protective net is added to the air outlet surface to ensure that the filter will not be deformed or damaged in a poor working environment; lightweight plate structure.
2. The windward area of the primary filter is increased. Dust particles in the incoming air are effectively blocked from pleat to pleat by the filter material. Clean air flows out evenly from the other side, so the airflow through the filter is smooth and even. The particle size of filtration efficiency is from 0.5pm to 5um. Flat-type primary filter can be customized.
23. The filter material is made of high-quality polyester synthetic fiber, which can be cleaned and reused many times, with long service life, economical and practical, and the fluffy and gradually dense fiber structure ensures a high dust collection rate and a large dust holding capacity, effectively prolonging the The service life of the back-end medium-efficiency filter.
4. Different thicknesses of 1 inch (21mm, 25mm) are available, and filter grades can be selected: G2, G3, G4 (EN779)
5. The maximum temperature for use is 80C, and the maximum humidity for use is 100%.

6. Filtration efficiency of flat-type primary filter: G1: 40%@5.0μm, G2: 65%@5.0um, G3: 85%@5.0um, G4: 90%@5.Oum.

Pre Panel Filter



Panel Pre-Filter Mesh
Pre-filtration of ventilation and air-conditioning systems in large-scale civil buildings such as office buildings, conference rooms, hospitals, shopping malls, airports, general industrial plants or central ventilation and air-conditioning systems in clean rooms

Panel Pre-Filter Mesh,High Temperatuer Hepa Filter ,V-Bank Hepa Filter,V-Cell Hepa Filter

Guangzhou Airy Filter Media Co.,ltd , https://www.gzairy.com