Steering pump noise elimination method

Steering pump is the power source for car steering. At present, the major domestic models such as Jiefang, Dongfeng, Great Wall pickup, and Jinbei coaches all use blade-type power steering pumps. The steering pump is equipped with a flow control valve and a safety valve, which is small in size, light in weight, and simple in system connection. The disadvantage is that the noise is large.

1: The main reason for the noise generated by the steering pump is that air is mixed in the system. Especially in the oil suction area of ​​the hydraulic pump, due to the low pressure, holes are easily generated. That is, the volume of the bubbles is compressed in the high pressure area, and the volume suddenly increases in the low pressure area. , an explosion that creates noise. Therefore, when the oil inlet pipe is installed, it must be sealed reliably to prevent looseness of the joint due to vibration; the sealing material must be very reliable, and the oil tank must have sufficient hydraulic oil.

2: The second reason for steering pump noise is failure of flow control valve, such as improper matching of valve hole and valve core, pulling of valve hole, contamination between safety valve and valve seat, sealing gasket is not round or notched, etc. Can cause noise. Especially when the control valve is working, the system pressure transients, which makes the control valve spring fatigue deformation failure, which will aggravate the noise. Therefore, check the use of the control valve, check whether the mating parts wear, pull hair, check the failure of the spring, if necessary, replace these parts.

3: The third cause of steering pump noise is caused by mechanical vibration. Therefore, when installing the steering pump, make sure that the coaxial error of the pump shaft and the main unit is less than 0.1mm, the inclination is less than 30, and the connecting pipeline should not be too thin or too long to minimize the elbow and avoid liquid eddy current. The steering pump speed should not be too high to avoid damage to the bearings.

Ratchet Tie Down

Ratchet tie down

Nylon webbing belt ratchet tie down strap is used for tying down loads while transporting, shifting or moving them.

Ratchet Tie Down

Description

1. Color: Blue, yellow, orange or requirement

2. B.S: 800kg-10000KG

3. Strap Material: Polyester, nylon, Polypropylene, Poly-amide, PP, PE...

4. Width: 25MM - 100MM

5. Length: 25ft,27ft,30ft,6m,8m,8.2m,9m,10m,or customize length

6. Hook: with relative double j hook (or claw hook or flat hook) or customize

7. Certificate: TUV, GS, ISO 9001, according to EN12195-2

8. Remark: OEM orders are acceptable

9. Packing: Carton, Pallet for 800KG-10T plastic handle cargo ratchet strap.

10.Place of origin: Zhejiang, China (Mainland)

11.Production lead time: Within 25 days after order of 800KG-10T plastic handle cargo ratchet strap confirmed.

12.Notice: Polyester webbing is unaffected by water, oils, grease and most chemicals, although contact with strong alkali should be avoided.


Used for restraint of cargo on truck or trailer in transportation.

A wide variety of standard and heavy-duty fittings are available.

Caution: cargo lashings must NOT be used for lifting.


The main advantages of ratchet lashings are:

1. Custom logo or design.
2. Load restraint using a tensioning device (ratchet)
3. Effective and safe control of loads whilst transportation
4. Extremely quick and efficient tie down and release of load thus saving time.
5. No damage to the load being tied down.

Specifications:

size of Ratchet Tie Down

25MM-100MM

breaking strength of Ratchet Tie Down

800KG-10000KG

Length of Ratchet Tie Down

4M to15M

Products show

Ratchet Lashing Straps Tie Downratchet tie down with double j hooks


WARNING:

1.The slings should avoid the harm of the sharp instrument when lifting the goods.

2.Don't put something on the ratchet to avoid the danger.

3.Never use slings with damages or defects.

4.Forbidden to tie a knot of the sling or link with a knot. You should link the sling with the right connecting piece.

5.Only use slings with clear identifications.

6.Before use,check working load limit, length and working position.

7. Don't use the ratchet strap for lifting.


Ratchet Tie Down,Ratchet Belt Tie Down,Ratchet Tie Down Straps,Ratchet Straps

Hebei Liston Lifting Rigging Manufacturing Co., Ltd. , https://www.liftingriggingfactory.com