On-site repair of slurry pump casing wear step
1. Disassemble the pump body and have repair conditions;
2. Flush the repaired volute with steam and a clean water source to remove residual media;
3. Roughing the repaired parts with sandblasting or electric tools to expose the original metallic color;
4. Use a clean compressed air to remove surface dust;
5. Brush the SD3000 primer material in the repaired area;
6. Proportionately blending Sole carbon nanopolymer materials;
7. Apply the Sole SD7400 material to the repaired area to a smooth surface;
8. Install the rotor impeller after the material is solidified;
9. Put into operation.
Check Valve,Threaded End Forged Steel Check Valve,Carbon Steel Rf Check Valve,Wafer Check Valve
ZHENGQIU VALVE GROUP CO.,LTD , https://www.sealweldballvalve.com