Ship Yokohama Floating Pneumatic Rubber Fender 0.05 0.08mpa
1. General introduction
ISO17357:2014 Floating pneumatic rubber fender is an anti-clossion device for marine application in the world. It is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to float on the sea surface and work as a shock absorber when ship to ship transfer operation and ship to dock berthing and mooring operations.
Evergreen floating pneumatic rubber fenders fully company with all requirements on ISO17357:2002 Sstandard. Our products are certificated by CCS, DNV, GL, LR and BV.
 2.  Construction  features
The basic body construction of  Floating pneumatic rubber fender consists of outer rubber layers, synthetic-tire-cord layers and inner layers. Please take the picture for reference.
All of these layers are vulcanized together ,and then compress air  inside to enable the fender to float on the sea surface.Â
 3.  Specification and Performance
DiameterxLength (mm) |
Initial internal pressure(kPa) | Energy(kj) | Reaction(kN) | Hull pressue(kPa) |
500x1000 | 50 | 6 | 64 | 132 |
600x1000 | 50 | 8 | 74 | 126 |
700x1500 | 50 | 17 | 137 | 135 |
1000x1500 | 50 | 32 | 182 | 122 |
1000x2000 | 50 | 45 | 257 | 132 |
1200x2000 | 50 | 63 | 297 | 126 |
1350x2500 | 50 | 102 | 427 | 130 |
1500x3000 | 50 | 153 | 579 | 132 |
1700x3000 | 50 | 191 | 639 | 128 |
2000x3500 | 50 | 308 | 875 | 128 |
2500x4000 | 50 | 663 | 1381 | 137 |
2500x5500 | 50 | 943 | 2019 | 148 |
3300x4500 | 50 | 1175 | 1884 | 130 |
3300x6500 | 50 | 1814 | 3015 | 146 |
4500x9000 | 50 | 4752 | 5747 | 146 |
Yokohama Pneumatic rubber fender are available from 500X1000mm to 3300X6500mm, including all the standard and no-standard specifications.
Details:
4.Pressure requirements of Yokohama type Pneumatic Rubber Fenders -
Evergreen-Maritime manufactures marine rubber fender with 50kPa (pneumatic 50) and 80kPa (pneumatic 80) initial pressure. The internal pressure, endurable pressure, safety-valve setting pressure and hydraulic test pressure are also in compliance with the requirements of ISO17357:2002.
Fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.Â
Â
 Â
Contact manufacturer directly for more details !
Marketing Manager:Â Â Â Â Aimee Sun
 Â
Tel/ 0086 17663929266
The Hydraulic Copper Metal Baler is used for cold press metal scraps within 6-8mm in thickness under most circumstance. The processable material includes scrap steel, waste containers and disintegrated vehicle shell etc. After cold pressing into block, it is convenient for storage and transportation or putting into furnace. Hydraulic Metal Baler working principle: The metal scraps and other materials are placed in the workbin. The hydraulic cylinder works to suppress the pressure. The baled material is compressed and formed into various metal blocks.
Copper Shavings Baler, Copper Turnings Baler, Waste Copper Baler, Copper Wire Baler, Copper Scraps Baler
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-balers.com