Saideli's first founding pull bag centrifuge

Jiangsu Saideli Pharmaceutical Machinery Co., Ltd. has successfully developed a vertical pull bag discharge centrifuge. Industry experts believe that the aircraft is a domestic initiative and has not been reported internationally.
Saideli company found in chemical and pharmaceutical companies visited and researched that traditional centrifuges easily formed filter cake on the wall during operation. After unloading by scraper, the remaining material layer could not be removed, and the material layer needs to be cleared periodically. Production continuity, and the material layer is mostly manual cleaning. In addition, manual cleaning will bring new pollution and affect the quality of the separated materials. In order to solve this problem, Saideli Company has explored, improved, and tested hundreds of times, combining the advantages of bag-type centrifuges with the advantages of blade-type centrifuges, and finally developed a vertical bag-pulling knife under the unloading centrifuge. machine. With this new device, when the separation operation is completed, most of the material is discharged to the outside through the blanking hole at the bottom of the drum under the force of the scraper, and the residual material layer moves through the automatic pull bag component inside the strand. Create an oscillating effect and completely remove the residual material layer. Vertical pull bag scraper under the unloading centrifuge can achieve automatic, continuous, closed pollution-free removal of residual material layer, has been welcomed by chemical and pharmaceutical companies. At present, the products have been declared national patents, and will apply for patents in European and American countries.
It is understood that in Switzerland, Germany, etc. in the removal of residual material layer is used in the air blowing method, but in the event of a slight viscosity of the material can not be effectively removed, Sidel's new products to overcome this problem.

Polishing Constant Force Actuator

Polishing is an application of our Force Control System, or Constant Force Actuator, or active contact flange. So you can call it polishing constant force actuator, polishing force control system, or polishing active contact flange. Our polishing constant force actuator has these characters: flexible control, quick response and instant adjusting. Can make workpiece surface effect even and consistent.

Polishing constant force actuator, Polishing force control system, Polishing active contact flange

DARU Technology (Suzhou) Co., Ltd. , https://www.szactivecontactflange.com