RO Water System 1/2 to 3/8 Brass Angle Valve Made in China

 Ro Water System 1/2 to 3/8 Brass Angle Valve Made In China

Main part: using the high quality refined copper ingot to manufacture the faucet shell with high density, anti oxidation and rust spots.

 

Valve element:

1. Using sophisticated ceramic valve core,  no water leakage.

2. no wear, aging resistance.

3. suitable for hard water, not affected by the gravel or sand.

 

Product list : faucet + accessories bag + white box

 

Electroplating: advanced plating processing

Packing and Shipping





Certification



 

Replacement Filter Elements

It is very important for element design and material.

Element Struction

FPM seal ring ensure the air-tightness between filter head and filter element, to achieve a positive filtration Effect.

Double stainless steel support layer to ensure the fulter element strength, deep bed Multi-wrap borosilicate glass microfibre large flow passage prevent high pressure drop.

With 96% porosity high dirt holding capacity, lifespan up to 6000 to 8000 hours. The general differential pressure is 0.17~0.25 kg/cm, less than 0.65kg/cm.

The element cover is made of PA+GF, free from deformation at 1.8Mpa pressure and high temperature of 240℃ and capable of resisting general acid and alkali chemical corrosion and withstanding the severe compressed air environment.

Special material for the outer layer of filter element, with strong hydrophobic and oilphobic, prevent the oil or water being blown away and received drying and filtering effect.

Industrial Air Filter Cartridges,Industrial Water Filter Cartridge,Compressed Air Filter Element,Activated Carbon Filter Cartridge

Hongrijia Depurate Facility Science & Technology Co.,Ltd. , https://www.yukafilter.com