Car coke has always been the most troublesome maintenance aspect for riders, but if you pay attention to good driving habits during daily driving, you can greatly reduce the formation of car carbon deposits. Here are some basic tips.
1. Do not drive for long periods of time
The idle time is long and the time required for the engine to reach normal temperature becomes longer. After the gasoline is sprayed on the back of the valve, the evaporation speed is slow, and carbon deposition occurs. At the same time, often idling, the air flow into the engine is also small, so that the erosion of carbon deposition is also very weak, it will promote the deposition of carbon deposits.
2, pay attention to the timing of flameout
For cars equipped with turbocharger, do not turn off immediately after driving at high speed or after climbing. Turn off at 10 minutes after idling. The car equipped with a turbocharger will form carbon deposits faster than normal suction. The car is several times faster.
It is recommended that the vehicle owners perform the free-to-remove cleaning of the air intake system every 20,000 to 40,000 kilometers under the conditions of regular maintenance, that is, using the dedicated equipment-specific method for the inlet of the vehicle without dismantling the engine. The carbon deposition operation is performed at the sites where carbon deposition is likely to occur, such as valves, oil passages, and the like.
3, use clean gasoline
Gasoline impurities are the main component of carbon deposition, so the cleanliness of gasoline has a weak tendency to form carbon deposits. However, it should be noted that high labeling does not necessarily mean high quality. The labeling only represents the octane number of the oil and does not represent quality and cleanliness. Some car owners use gasoline cleaners in gasoline to ensure the cleanliness of gasoline. This can effectively prevent the formation of a carbon deposit on the metal surface, and can gradually activate the original carbon particles and remove it slowly, thereby protecting the engine from harm. However, the addition of gasoline cleaner must be careful, if you add a counterfeit product will have the opposite effect.
PET jar preform mould for producing big neck of PET preforms, such as candy bottle, cosmetic bottle, can and so on. With the advanced technology and good imported material support, compared with the tranditional preform mould, our mold cavity broekn rate is much lower. The guarantee is 1 million shots. It suitable for all PET injection machine in market.
Pet Preform Mold,Pet Jar Preform Mould,Pet Tube Preform Mold,Pet Preform Injection Mould
WENZHOU WINIBER MACHINERY EQUIPMENT CO., LTD. , https://www.winibermachinery.com