Mercedes-Benz is being chased by Ferrari chauffeurs wanting to be alarmed by clubs and machetes

Mercedes-Benz is being chased by Ferrari chauffeurs wanting to be alarmed by sticks machete chasing diesel generators | diesel generators price / 2012-06-16

Around 2 a.m. the day before yesterday, at the junction of Baishou Road and Ziwei Road, Xinhua Street, Huadu District, Guangzhou, a Mercedes-Benz car was waiting for the traffic lights and was rear-ended by a white Ferrari. The two cars collided slightly. The driver on the Mercedes Benz found the other person suspected of being drunk and was ready to call the police. At this time, the co-pilot on the Ferrari and several of the cars behind Ferrari were nearly ten. They took one meter long sticks and machete from the car and chased Mr. Zhang and Mr. Li.

After seeing the unfavorable situation, Mr. Zhang fled to Orchid Road and was rescued by an Audi driver. He was sent to Huadu Chinese Medicine Hospital. Mr. Li hid back into the Mercedes-Benz car and fled to a community. He was sent to Renai Hospital after being treated by an ambulance. Mr. Zhang and Mr. Li were injured in varying degrees. Among them, Mr. Li suffered more serious injuries and the two were in no danger of life. At present, the police have been involved in the investigation.

Both of their heads were wounded by sticks

Yesterday morning, the reporter went to the Huadu District Hospital and the Renai Hospital in Huadu District respectively. He saw the Mercedes-Benz car advocate and Mr. Li who was sitting in the copilot. Mr. Zhangâ€™s head was wrapped in white gauze and was being dripped in the emergency observation room. According to him, his head was pierced by a stick with a hole about 1 cm in diameter, and more than 20 stitches were sewn. His left forearm and back have obvious bruises.

In Renai Hospital, Mr Li, who was admitted to the surgical ward, was seriously injured. His head was also wrapped in gauze, and his left ear and right hand were wrapped with gauze.

Suspected wine drunk driver

Mr. Zhang said that the day before yesterday morning, he and Mr. Li had finished business in Huadu, preparing to carry Mr. Li to the hotel. "I was at the traffic lights at the Baishou junction. I was ready to turn left to Lagerstroemia Road. Suddenly, a car rushed up and hit the right back side of the car." Mr. Zhang both of them got off to see the situation. "It was a white Ferrari that ran into it, and there were three or four cars behind it. It was all about BMW and Mercedes." Mr. Zhang said that Ferrari had no license plate at the front. Two people have fallen from Ferrari and are not 30 years old. "The driver is a tall, thin man. The co-pilot is a short-shouldered youth with a height of about 1.6 meters," said Mr. Zhang.

After Ferrari's driver came down, he said he was willing to give them 1,000 yuan privately. Mr. Li saw the driver of the other party as drunk, just like Mr. Zhang could not tell the police. Afterwards, the Ferrari driver shouted, "Smit the guy and killed them." The co-pilot and the following cars got down to a total of nearly ten people and took out more than a meter long sticks and machetes from the car.

Mr. Zhang saw that the momentum was not good. He abandoned the car and ran and fled to nearby Orchid Road. "At the Orchid Road, a driver who opened an Audi car saw me and let me get in the car, sent me to the hospital, and advanced the treatment costs for me."

Next:Installation, use and regulation of marine diesel generator sets
Previous:Shenyang Hospital Appointed Accreditation Medal for Hit Medical Staff

Plastic Injection Components

There are many methods of plastic molding. Injection molding is one of them. Injection molding is also called injection molding, which is called injection molding for short. It is a main molding method of thermoplastic. Because it has the advantages of wide application, short forming cycle, high production efficiency, good production conditions, easy mechanization and automation, it plays an important role in the whole plastic forming process.Injection molding refers to injecting granular or powdery plastic from the hopper of the injection machine into the high-temperature barrel, heating, melting and plasticizing to make it a flowing melt, and then under the high pressure of the plunger or screw of the injection machine, it passes through the nozzle at a large flow rate and is injected into the mold cavity. After a period of pressure maintaining, cooling and shaping, When the mold is opened, the Plastic Parts with certain shape and size can be detached from the mold cavity. In this way, the time required to complete an injection cycle can range from a few seconds to tens of seconds, which mainly depends on the size and thickness of the workpiece.

Plastic Injection Components,Plastic Injection Molding Components,Plastic Injection Molding Mach,High Pressure Custom Plastic Injection Molding

Suzhou Dongye Precision Molding Co.,Ltd. , https://www.sjdongye.com