CNC lathes can perform feed movement, spindle rotation, tool indexing, coolant switch, and chip remover start and stop through manual operation of the control panel.
First, feed movement operation
Feed motion can be divided into continuous feed and jog feed. The difference between the two is that in the manual mode, pressing the coordinate feed key, the feed part moves continuously until the coordinate feed key is released; in the jog state, each time the coordinate feed key is pressed, the feed part Only move a preset distance.
Feed operations include continuous, jog mode selection, feed setting, feed direction control, etc.
Second, spindle and cooling operation
In the manual mode, you can set the spindle speed, start the spindle positive, reverse and stop, coolant on and off.
Third, manual tool change
For CNC lathes with automatic tool changer, the tool rest can be automatically indexed by program instructions, and the tool rest can be manually controlled via the panel.
Fourth, chip control
Press the appropriate button to control the forward, reverse and stop of the chip conveyor. It is used for chip evacuation. When iron chips jam the chip remover, it can be turned off.
First, feed movement operation
Feed motion can be divided into continuous feed and jog feed. The difference between the two is that in the manual mode, pressing the coordinate feed key, the feed part moves continuously until the coordinate feed key is released; in the jog state, each time the coordinate feed key is pressed, the feed part Only move a preset distance.
Feed operations include continuous, jog mode selection, feed setting, feed direction control, etc.
Second, spindle and cooling operation
In the manual mode, you can set the spindle speed, start the spindle positive, reverse and stop, coolant on and off.
Third, manual tool change
For CNC lathes with automatic tool changer, the tool rest can be automatically indexed by program instructions, and the tool rest can be manually controlled via the panel.
Fourth, chip control
Press the appropriate button to control the forward, reverse and stop of the chip conveyor. It is used for chip evacuation. When iron chips jam the chip remover, it can be turned off.
defoamer chemical,defoamer antifoam,defoaming agent,foam and antifoam
NINGBO LUCKY CHEMICAL INDUSTRY CO. LTD , https://www.nbluckychemical.com