ctb wet wet magnetic separator suitable for a particle size below 3mm magnetite, pyrrhotite, roasted ore, titanium, iron and other materials, but also for coal, non-metallic minerals, building materials like iron work . The magnetic system of the ctb wet magnetic separator is made of high-quality ferrite material or composite with rare earth magnet steel. The average magnetic induction intensity of the cylinder table is 100-600mT.
The dry magnetic separator is a magnetic beneficiation machine for sorting dry magnetic minerals. Compared with the wet magnetic separator, when using minerals as a diluent to improve the sorting efficiency, the dry magnetic separator is required to be The sorted minerals are dry, and the particles can move freely and become independent free states. Otherwise, the magnetic separation effect will be affected, and even the result of non-sorting may be caused.
Permanent magnet magnetic roller (also called magnetic pulley) is mainly used for the following purposes:
1. The rough selection of lean iron ore after coarse or medium crushing, to exclude waste rock such as surrounding rock, improve the grade and reduce the load of the next process.
2. For the hematite reduction closed-circuit roasting operation, the raw ore that has not been fully reduced will be sorted and returned to re-burn.
3. Used in the ceramic industry to remove the mixed iron in the porcelain mud and improve the quality of the ceramic products.
4. Iron removal operations for coal mines, foundry sands, refractory materials and other lines.
SSS series high gradient magnetic separator, high gradient magnetic separator is a new type of high-efficiency magnetic beneficiation equipment. Due to the unique dual-frequency pulse device, it can achieve high-grade concentrate with both concentrate quality and metal recovery rate. It can also reduce the grade of tailings to a certain extent, and the selection indicators can be flexibly adjusted according to the needs of the process.
We producesquare steel bar by cold drawing through square mould from hot rolled steel round bar or hot rolled square steel bar. In this way, square steel bar has precision size tolerance, better surface and sharp corner radius. Except cold drawn square steel bar, we can also produce heat treated square steel bar. For example, annealed square steel bar, qhenched and tempered Q&T square steel bar. After heat treatment, you can get the proper square bar hardness according to your end usage. For heat treated square steel bar, straightness is very important. We have fine straightening machine to do straightening to keep good straightness.
Square Steel Bar,Steel Square Bar, Mild Steel Square Bar, Alloy Steel Square Bar, Cold Drawn Square Steel Bar,Cold Drawn Steel Square Bar
SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.sdthreadedrods.com