Machinery and equipment procurement technical requirements

skills requirement

I. Purchase content and quantity

Package 1: Buried garbage horizontal compression station equipment

Item number

Item Name

Quantity (units)

1-1

Ground level compressed garbage station equipment

Batch 1

 

Second, technical specifications, parameters and requirements

1

Compact waste station

Package: Ground Level Compression Garbage Station Equipment (This package budget: 180000.00 yuan)

1-1 : Buried Horizontal Compression Garbage Station Equipment Batch 1

Horizontal compression type garbage station main technical parameters
1 , the main equipment form: full buried, no upper structure;
2 , compression method: horizontal compression;
3 , compression force: ≥ 42 tons; ( calculated according to system pressure 21Mpa )
4 , system rated pressure: 21MPa;
5 , motor power: ≥ 7.5KW ;
6 , pit depth: ≤ 1.5 meters

Waste station equipment

(must be satisfied) to facilitate sewage discharge and pit cleaning;
7 , garbage compression warehouse net volume: not less than 6.3M3
8 , the thickness of the compression chamber floor: the thickness of the steel plate is not less than 8mm ;
9 , Rated load: ≥ 4.2t ( Household garbage )
10 、Lifting adopts double-side scissor lift; (must be satisfied) Attached structure chart (bidding, acceptance basis)
11 , daily garbage: ≥ 40T
12. Sewage collection: Sewage diversion tanks are installed in the tank body. Sewage collection boxes are installed at the bottom of the tank. Precipitation sewage pipe network is built in the pits, and mud wells are set outside the pits. Wastewater from compressed garbage flows into the collection box through the diversion channel, and then enters the sewage pipe network, and then enters the remaining mud wells. Through the sewage pump in the pit, the sewage can be introduced into the nearest sewage pipe network or the garbage truck. Water tank.
13, safety devices: a mechanical support means proof hydraulic valves + + electrical interlock multiple security devices and the like, to ensure that accidental falls casing lifting situation does not occur.
14. Spraying dust-falling device: 2 atomizing nozzles are arranged at the putting-in port . Through the valves on the operating pipeline, the nozzle sprays atomized water mist, effectively suppresses the dust generated when the garbage is dumped, and improves the working environment.

Model tender letter of goods