The first car in 2013 to choose 2.8 Omar
Before entering the truck industry, Master Zhang engaged in five-year ship repair work, which was as large as 20,000 horsepower. The diesel engines, which are as small as single-cylinder lifeboats, had contact. The Cummins engine he first contacted in 2004 was a marine engine. In 2011, Master Chang began to obtain a B2 driver's license, and in 2013 he purchased his first truck, which was powered by Futian Ouma of the Cummins ISF 2.8-liter engine.
Futian Ouma with Cummins ISF 2.8-liter engine
For retail drivers, the first car is very important. Master Zhang also took the risk of buying the car. At that time, 70% of the money he bought was borrowed. He said that since the beginning of the pressure is really great, but fortunately the car to fight gas, Cummins ISF2.8 engine attendance rate of 100%, in 2013 to help Master Zhang to earn back the cost of the car.
Master Zhang said that his first car chose Omagh and what he saw was a combination of Cummins engines and ZF transmissions. This Omar can carry 131 horsepower ISF2.8 engine, ZF five-gear box, Dana rear axle, chassis price 86,500, all down to spend 109,000.
This Omar can run a total of 100,000 kilometers in three years. In use, Master Zhang is most satisfied with the power and silence of the Cummins engine, the vehicle is accelerating faster, the throttle is also quite sensitive, and the engine is explosive. In terms of maneuvering, the direction of the vehicle is very precise, the high speed is very stable, and the empty car is not floating.
Master Zhang also shared the fuel consumption of the vehicle. During the time he had just bought the car, Master Zhang did not have much business and the time was relatively lenient. At that time, the fuel consumption could reach 5,6 kilograms per kilometer. But now it has reached 8,9 hairs. There are many reasons. The first is more goods. If you don't run for fuel, people will help you to run. The second cargo was heavy. From the previous standard loading to the present, it often takes more than 5 tons. In order to run the horse, the horse must eat grass.
Third, he belongs to door-to-door delivery, parking, unloading, and collecting money. It takes 3 minutes to finish the whole family. During the time the car does not turn off, the fuel consumption starts to increase. Fourth, now that the high speed is the upper limit of the speed limit. According to his use environment and conditions, Master Zhang is still very satisfied with the current fuel consumption.
Reliance on the Cummins engine to follow the car must take Kang Kang
Thanks to the excellent performance of 2.8 Omega, Master Zhang bought a new 3.8-inch version of Ollington and a 9-millimeter Auman GTL Super Edition this year. When choosing his new car, Master Zhang was aiming at the Cummins engine. He said: "Cummins has given me too much! It is a very reliable partner on my way."
Technical version of Aoling carrying a Cummins engine
The Auman GTL that was purchased in April of this year is a Cummins ISG engine with 310 hp, a 4.11 speed ratio, a 12-speed transmission with an overdrive gear, a 12.00 vacant tire, and a twin sleeper. In addition to Cummings' factors, Master Zhang chose Auman GTL for other reasons. The first is the appearance of a beautiful atmosphere, the second is Cummins's 100,000 long maintenance cycle and low-speed high torque, the third is comfort, the whole car vacuum tire Cab 4 airbag suspension, the fourth is the engine braking and intelligent speed control.
Auman GTL uses Cummins ISG engine
Among these major advantages, the effect of engine braking made him very satisfied. He said that engine brakes are much stronger than exhaust brakes. Steels are normally transported, and long slopes of 2 kilometers are under 30 tons. The road conditions are basically good without braking. , With the appropriate gear can basically achieve the desired braking effect. In addition, ISG's fuel-saving effect also allows Zhang master to be full of praise, and compared with their peers, can save 2-3 cents per kilometer. Of course, to make Master Zhang more comfortable, he opened the ISG-powered car. On the road, no one can easily overtake him.
As a technical controller, Master Chang showed us the Cummins C-Link remote intelligent service system with great interest.
Cummins C-Link Remote Intelligent Service System
Through the C-Link Mobile App, Master Zhang and his friends can keep track of vehicle operations, current fuel consumption, and fault warnings in real time. In the eyes of Master Zhang, it is absolutely necessary to add this high-tech gadget to the vehicle. It can help correct the wrong driving habits of the driver, plan a reasonable driving route, early warning the status of the engine, and improve the overall operating efficiency. Is a good helper for the team.
The car is very careful Caring for pure parts Cummins
In fact, even the best car also needs the care of the driver. Master Zhang’s vehicles were carefully maintained. Diesel was only added at the regular gas stations and the engine oil was made of original motor oil. In terms of accessories, all of the original products are used. Now that online shopping is in progress, many accessories are purchased from Futian or Cummins's Lynx flagship store. He also purchased Fleetguard diesel fuel filters from the Truck House Mall and installed it on the Auman GTL.
Cummins Genuine Original Engine Oil
Thanks to the stable performance of the three cars in the name, Master Zhang has already established a career in Guangzhou, has a car, and has a happy life. However, the recent implementation of the new rules of GB1589 and 921 made him more worried. Master Zhang said that the New Deal had a great influence on his Auriga GTL that pulled steel. According to the new regulations, the total mass of his car after the first four to eight cars can only reach 31 tons. Prior to this, his car can be loaded to 40 tons. After the new regulations, it will reduce 9 tons, and it will be installed one-third less. goods. If the new regulations are very strict, they need to consider buying a 6-axis trailer to pull steel.
Recommended partners have money to earn together
After enjoying the benefits of the Cummins engine, Master Zhang not only chose the Cummins engine for his own car, but also had friends around him who bought the Cummins engine. After he had been recommended by the master, he bought the Cummins engine and installed it. Later, they bought three Jianghuai Shuai Ling carrying a Cummins 3.8L engine and Dongfeng Tianjin equipped with an ISD6.7L engine.
Master Zhai said that each time they choose a car, they compare it online and offline, and go to the dealership to test the car in person. Every time they have considered other brands of vehicles, but no matter how they compare, how to try, they still have to Buy a Cummins engine, because its performance is there, at a glance.
Now, they and a group of small partners have rented a parking and office space on the Pearl River. The development of the small fleet is very impressive. The entire team of people became Cummins' iron powder.
After reading this, does everyone have the same urge to buy a Cummins powered truck as Kang Kang?
CNC Milling Machine is an automatic processing equipment developed on the basis of general milling machine.The processing techniques of the two are basically the same, and the structure is somewhat similar.CNC milling machines are divided into two categories: without a tool magazine and with a tool magazine.The CNC milling machine with a tool magazine is also called a machining center.
Features
In addition to the characteristics of ordinary milling machines, CNC milling has the following features:
1.The parts are highly adaptable and flexible, and can process parts with particularly complicated contour shapes or difficult to control dimensions, such as mold parts and shell parts;
2.It can process parts that cannot be processed or difficult to machine with ordinary machine tools, such as complex curve parts and three-dimensional space surface parts described by mathematical models;
3.Parts that can be processed in multiple processes after being able to process a single clamping position;
4.The processing precision is high, the processing quality is stable and reliable, the pulse equivalent of the numerical control device is generally 0.001mm, and the high-precision numerical control system can reach 0.1μm. In addition, the numerical control processing also avoids the operator`s operation error;
5.High degree of production automation, can reduce the labor intensity of the operator. Conducive to the automation of production management;
6.High production efficiency. CNC milling machines generally do not need special process equipment such as special fixtures. When replacing workpieces, it is only necessary to call the machining program, clamping tool and tool data stored in the numerical control device, thus greatly shortening the production. cycle.
Secondly, the CNC milling machine has the functions of milling machine, boring machine and Drilling Machine, which makes the process highly concentrated and greatly improves the production efficiency.
In addition, the spindle speed and feed speed of the CNC milling machine are infinitely variable, so it is beneficial to choose the best cutting amount.
Cnc Milling,Desktop Cnc Milling Machine,Cnc Milling Machine,Cnc Mill
Jiangsu Hoston Machine Tools Co., Ltd. , https://www.hostoncncs.com