It is reported that the Korea Auditorate detected the issue in December last year. Song Yongxian, a member of the National Assembly, said that the 214-class submarine is required to withstand huge water pressure operations in the deep sea with a maximum depth of 400 meters. If the important part of the fixed screw is loose during navigation, it can easily cause major accidents. It is reported that the South Korean navy explained that the screws will be repaired whenever there is a problem, so the war will not be affected.
According to a survey conducted by the South Korean Navy, the first reason is that the product delivered by the manufacturer of the screw, South Korea W, did not meet the HDW company's design requirements for bite strength. The South Korean Navy and Hyundai Heavy Industries changed all the screws of the fixed deck according to HDW's specifications. However, the screws still appeared loose. HDW's technicians personally went to South Korea. From June last year to February of this year, another layer of steel plate was added inside the deck and fixed with supporting bolts.
Some officials revealed that during the period from 2006 to 2009, the 214-class submarine No. 1 Sun Yuanyi had more than 20 fixed-deck screws loosening six times during navigation. The No. 2 boat “Zheng Di†had also experienced loosening or breaking of screws in 2009 from 2009 to 2010. During the period from 2009 to 2010, the No. 3 boat “Ansonggen†had problems with three screws, two of which were loose and two were broken.
The reason is that the screws on the deck of the fixed bridge (projecting part above the hull of the submarine) are poorly engaged and the screws often loosen or break during navigation. The 214-class submarine was designed by the German HDW shipyard. The South Korean Navy’s main submarine was built by Hyundai Heavy Industries. The three ships built from 2007 to 2009 have all been listed as troops. It is currently planned to install six more.
High Performance Injection Molding Machine
Rainbow CHF series high performance servo plastic injection molding machine is an optimized series of injection machine with stronger components and better performance.
The clamping unit adopts 5 point toggle system and FEA, it decreased 1/3 percent distortion than normal machine, and the better rigidity can adapt precise products molding and highly improve working life of moulds.
The injection unit with fast response, high precision, small motion inertia, small mechanical back-pressure and less injection oil return, is suitable to mold precise and thin-wall products.
The new design of hydraulic unit of Rainbow F series, cooperates with new software and electronic control technology, realized fast response, high speed, and pressure control.
High Performance Injection Molding Machine,Rubber Injection Molding Machine,Horizontal Injection Molding Machine
Ningbo Rainbow Plastics Machinery Co., Ltd. , https://www.injection-machine.com