Long-term stagnation of sweeper maintenance rules

1. Prevent aging and deterioration of rubber products Rubber products on road cleaning vehicles, such as sweeping wheels, transmission belts, and dust covers, often undergo aging, swelling, or deformation, resulting in deteriorated performance and shorter service life. The aging of rubber products is mainly due to the fact that rubber is an unsaturated polymer hydrocarbon that easily absorbs oxygen in the air and oxidizes. Vulcanized rubber also has certain permeability, and oxygen easily enters the interior to cause oxidation. Especially direct sunlight can promote rapid aging of rubber. After rubber products are contaminated with gasoline and engine oil, they will cause volume expansion, loosening gums, and reduced elasticity.
2, to prevent the metal rust Corrosion is mainly caused by the joint action of moisture, oxygen and corrosive substances in the air. Therefore, for road sweepers that are parked for long periods of time, the metal surfaces should be kept clean. Parking garages should always be ventilated to keep the relative humidity below 70%. The dust, dirt, and moisture on the road sweeper should be promptly removed. The rust-prone parts and the surfaces of the parts should be coated with oil, grease or wrap. The pores in each assembly should be sealed to prevent air, moisture and dust from entering the interior.
3, to prevent the anti-explosive performance of gasoline to reduce The anti-explosive performance of gasoline depends on the level of octane gasoline. As the road sweeper is stopped for a long time, the octane number of gasoline will decrease with the loss of light components and the increase of the colloidal content, thereby reducing its antiknocking property. Therefore, the gasoline tank must be tightly sealed and the temperature must not be too high. Gasoline storage time is best not to be too long.
4. Check the working condition of the sweeper engine regularly. Start the sweeper engine at least once a month, idling for 4-5 minutes, and check the running status of the sweeper engine. If there is any abnormality, it needs to be adjusted and maintained in time. In addition, always check the battery. The electrolyte level of the battery must be 10-15mm higher than the plate. When it is insufficient, distilled water should be added in time. The battery should be kept fully charged and the battery should be charged when necessary.

Conveying Equipment Series

The Conveying Equipment Series is a collection of machines designed to transport materials from one place to another. These machines are used in a variety of industries, including manufacturing, mining, agriculture, and construction. They are essential for moving materials efficiently and quickly, reducing labor costs, and improving productivity.


One of the most common types of conveying equipment is the conveyor belt. This machine consists of a belt that moves continuously, carrying materials from one end to the other. Conveyor belts are used to transport a wide range of materials, including grains, coal, rocks, and chemicals. They are available in different sizes and configurations, depending on the specific needs of the industry.


Another type of conveying equipment is the bucket elevator. This machine consists of a series of buckets attached to a chain or belt. The buckets are used to scoop up materials from one level and transport them to another level. Bucket elevators are commonly used in the agricultural industry to transport grain and other crops.


Screw conveyors are another type of conveying equipment. These machines consist of a rotating screw that moves materials along a trough or tube. Screw conveyors are used to transport bulk materials such as grain, cement, and chemicals. They are commonly used in the food processing industry for transporting ingredients and finished products.


Pneumatic conveying systems are also commonly used in many industries. These systems use air pressure to move materials through pipes or tubes. Pneumatic conveying systems are often used in the chemical industry to transport powders and other materials that are difficult to handle with other types of conveying equipment.


In addition to these types of conveying equipment, there are many other machines available for transporting materials. Some of these include belt conveyors, roller conveyors, vibrating conveyors, and chain conveyors. Each of these machines has its own advantages and disadvantages, depending on the specific needs of the industry.


Overall, the Conveying Equipment Series is an essential collection of machines for many industries. These machines are designed to move materials efficiently and quickly, reducing labor costs and improving productivity. With so many different types of conveying equipment available, it is important for industries to choose the right machine for their specific needs.

Conveying Equipment Series,Vane Pumps,Screw Conveyor,Vane Pump Equipment

Jiangsu Stord Works Ltd. , https://www.stordworks.cn