What are the problems of using fluorine butterfly valve? First, the multi-layer soft and hard stacked ring fixed to the valve plate, when the valve plate normally open state of the sealing surface to form a positive erosion, sheet metal sandwich in the soft seal by the erosion, directly affect the sealing performance. Second, by the structural conditions of the structure does not adapt to do the following DN200 valve, because the overall structure of the valve plate is too thick, large flow resistance. Third, because of the rubber lining butterfly valve principle, the sealing surface between the valve plate and the valve seat is driven by the torque of the valve so that the valve plate is pressed against the valve seat. Positive flow state, the folder pinch valve, fluorine valve, exhaust valve medium pressure higher seal squeeze tight. When the flow medium countercurrent media pressure increases with the pressure between the valve plate and valve seat unit pressure is less than the medium pressure, the seal began to leak. Fourth, the high-performance lining fluorine butterfly valve, characterized in that: the seat ring seal by the flexible T-ring multi-layer stainless steel sheet on both sides. The sealing surface of the valve plate and the valve seat is an oblique conical structure, and a temperature-resistant and corrosion-resistant alloy material is deposited on the oblique conical surface of the valve plate; the spring fixed between the adjusting ring plate and the adjusting bolt on the pressure plate is arranged together. This structure effectively compensates for the tolerance band between the sleeve and the valve body and the elastic deformation of the valve stem under the medium pressure and solves the sealing problem existing in the process of transporting the valve in the bidirectional interchangeable medium. The soft T-shaped multi-layer stainless steel sheet on both sides of the seal ring, with the advantages of both metal seal and soft seal, both in low temperature and high temperature conditions, have zero leakage of sealing performance. Experiments show that pool positive flow state (medium flow direction and disk rotation in the same direction), the sealing surface pressure is the torque of the actuator and the medium pressure on the role of the valve plate. Positive media pressure increases when the valve plate oblique cone surface and seat sealing surface squeeze the more tight, the better the sealing effect. In counter-current conditions, the seal between the valve plate and the valve seat presses the valve plate against the valve seat due to the moment of the drive. With the increase of reverse medium pressure, the positive pressure between the valve plate and the valve seat is less than the pressure of the medium, the deformation energy stored in the spring of the adjusting ring of the colloid mill emulsifier strainer compensates the position of the valve plate and the valve Sealing surface of the tight pressure play an automatic compensation. Therefore, unlike the prior art, the utility model has the advantages that the soft and hard multi-layer sealing ring is mounted on the valve plate and is directly mounted on the valve body, and an adjusting ring is provided between the pressing plate and the valve seat which is a perfect bidirectional hard sealing method . Search Keyword: More Valve Technical Articles Valve Products Supply Information
resistance of mechanical body, protecting parts of equipment system and prolonging the service life of equipment.
Alumina Ceramic Lined Steel Pipe
Product Description
It is widely used in metallurgy, sintering, mining, cement plant, steel plant, textile factory and other industries. For example, the manufacture of mixer and silo lining board has good wear resistance, non-stick, low impact load, saving energy consumption, protecting silo lining, improving the wear resistance, high temperature resistance and corrosionresistance of mechanical body, protecting parts of equipment system and prolonging the service life of equipment.
Hebei Tongye Metallurgical Science And Technology Co.,Ltd(Former Hebei Province Gucheng County Tongye High wear-risisting material Factory) was founded in 1998 which there are 380 workers and 98 engineering technician in. It's the only one manufacturer in China that produces high wear-risisting material nylon series products.Our production and market share of wear-resisting materials accounted for 70% of the metallurgical industry in China ,is the highest in the domestic industry.
Pe Pipes,Ceramic Lined Steel Pipe,Alumina Ceramic Lined Steel Pipe,Abrasion Resistance Ceramic Lined
Hebei Tongye Metallurgy Technology Co., Ltd. , https://www.hbtyyejin.com