First, the main purpose
At present, there is a common problem in China's large and medium-sized vertical axial-flow pump stations that the hydraulic model is outdated, the actual lift of the pump station is much lower than that of the pump design, unstable operation and short cycle of overhaul. By adopting this new technology, , Increase pump flow, reduce energy consumption, improve safety and stability, extend the overhaul cycle.
Second, the technical points
1. According to the specific requirements of specific pumping station, select or design the best axial flow pump model, match the design lift of pumping station with the actual operation lift of pumping station, increase the pumping capacity of pumping station, improve the pump cavitation performance and improve the stability of operation.
2. Maintain the civil engineering and buried parts of the pump station does not move, to retain the matching motor and other electrical equipment, only replace the pump key components (such as pump wheel, pump housing and guide vane segment).
3. Optimize the pump structure, improve materials, improve the quality of pump parts processing, extending the overhaul cycle.
Taking Xinjiang Bosten West Water Pumping Station as an example, West West Pump Station is equipped with six 16CJ-80 fully-regulated vertical axial-flow pumps. The water pump runs away from its high-efficiency zone for a long period of time, pumping efficiency is very low and the pumping capacity of the pumping station is no longer sufficient Growing water needs downstream. Pump to take the following measures: Replace the pump, pump housing and guide vane segments, with the I27 pump and G17 guide vane replacement of the original pump and guide vanes, stainless steel pump impeller, the appropriate increase in pump diameter and pump overcurrent Area, simplify the pump structure. After the renovation, the total flow of the pumping station increased by 40% and the relative device efficiency increased by 37%. The energy consumption per tonne of rice was reduced by 1.56kW · h, the annual energy saving was 4.368 million kW · h, and the overhaul period was extended by 3 years. Leading level.
Third, the scope of application
Large and medium-sized vertical axial flow pump station.
Fourth, the expected benefits
The amount of irrigation and drainage power in China has exceeded 70 million kW and there are over 300 large-scale pumping stations, providing strong support for the sustainable development of the national economy. At present, nearly half of the large and medium-sized vertical axial-flow pump stations were built in the 1960s and 1970s and have entered the period of renewal and reconstruction. Some large and medium-sized vertical axial-flow pump stations, built in the 1960s and 1970s, The reasons are urgent to be modified, the application of this technology will have a tremendous economic and social benefits.
Taking Bohu West Pumping Station as an example, the electricity and overhaul expenses saved after the reform and operation for 3 years can all be reimbursed for the retrofit expenses. After the pump is changed, the water flow of the pump station is increased by 17.4m3 / s, which can save the need for building the same flow pump station Of the capital of 18 million yuan (calculated at the price of 1988) will improve irrigation area of ​​1 million mu, help to improve Bo Lake water quality, protect the ecological environment and create water supply conditions for petroleum, chemical and other industrial water supplies. Its social and ecological benefits can not be estimated.
Fifth, technology sources
China Institute of Water Resources and Hydropower Research.
Redispersible Polymer Powder 8020
Redispersible Polymer Powder 8020,Hot World Selling Rdp,Rdp Powder For Grouts,Cement Waterproof Gypsum Powder
Puyang Ruidaxu New Materials Company Ltd , https://www.pyruidaxu.com