How to identify the common faults of car burglar alarm

Symptom 1: The remote control does not work. When you press each function button of the remote control, the red LED of the remote controller does not light up.

Analysis of reasons: This fault is mostly in the remote control itself, and there are the following situations: (1) The battery is exhausted; (2) The battery is positive or negative, and the reed is rusty or in poor contact; (3) The remote controller is rained or Water, oil, etc. In this regard, the circuit board can be taken out, cleaned with industrial alcohol, dried with a household hair dryer or allowed to dry naturally before use.

Symptom 2: The remote control distance becomes shorter and shorter. When the signal is transmitted, the LED brightness of the remote controller becomes dark or flashes.

Analysis of the reasons: This phenomenon is mostly battery low battery replacement. In addition to this, it is recommended not to adjust or replace the components of the remote control yourself, so as to avoid causing greater losses.

Symptom 3: A function key of the remote controller fails. When this key is pressed, the LED indicator does not light.

Analysis of the reason: The failure of a function key (other function keys are normal) is mainly because the function keys are damaged or the soldering points of the key pins and the circuit board are desoldered. The keys of the remote control are mostly micro-switches, which are usually light when used, and they are waterproof, drop-proof, and heavy.


silicone injection molding machine

Lsr Injection Molding Machine,Liquid Silicone Rubber Injection Molding Machine,Silicone Mould Making Machine,Silicone Mold Machine

Turn Machine (Zhejiang) Co., Ltd , https://www.turn-machine.com