How to detect and distinguish the LED display unit board?

Posted on

The basic unit of LED display is the LED unit board. If there is a problem with the unit board, it will directly affect the display effect of the entire screen, such as common color difference, regional black screen and other phenomena! How to detect and distinguish the LED display unit board? It has become a concern for both merchants and manufacturers. The following is a practical method for testing LED unit boards organized by Lianchengfa LCF:
Material
1. LED unit board sheet
Some LED unit board manufacturers are competing at low prices, using cheap flame-retardant paper boards or single-sided fiber boards as the PCB circuit boards for LED lights. There is no difference in starting use, and it is easy to break due to moisture, UV damage, oxidation, etc. after about 1 year of use, causing the entire LED unit board to be scrapped. The high-quality LED display unit board uses double-sided full glass fiber PCB board, although the cost is high, but the quality is guaranteed.
2. IC device
Is the brand of IC devices consistent? What type of IC is used, and how many ICs are used, these are enough to affect the quality of the LED unit board. In order to save costs, some LED display manufacturers intentionally reduce the number of ICs when producing cell boards, or mix other brands of ICs.
3. LED lamp beads and chips:
The naked eye cannot distinguish the quality of the lamp beads. It can only be distinguished by long-term testing. Generally informal LED display manufacturers, products will be powered on before leaving the factory to check whether the LED display is working properly, but will not go through a long-term aging test, because there are time costs and labor costs. As a Shenzhen LED display brand manufacturer, Lianchengfa has a strict production and quality inspection process. Before the product is shipped, the aging test is lit for at least 72 hours to ensure that each product can be delivered to the customer.
Welding quality
Check whether the patch has missing or misplaced components, and whether there is a short circuit on the component pin burrs. Check whether the solder joint of the straight plug is smooth and round, and whether the board surface is clean and tidy, and there is no virtual solder leakage. Check the insertion flatness of the light-emitting dot matrix and the consistency of the ink color.
Power-on test
Power-on test (refer to the steps of "Performance Test Report"):
â‘ Test the consistency of the light-emitting lattice when power on;
â‘¡ Power-on test whether the CEM4953 line drive tube is effectively protected;
â‘¢ Power transmission test signal transmission capability.
The above is about the method of detecting the quality of the LED display unit board. Quality is king, and refuse to resist cheap and inferior LED display screens, so as to avoid damage to the LED unit board and affect normal work, as well as subsequent unnecessary maintenance.

Rotary Drum Vacuum Filter

Rotary Drum Vacuum Filter are used extensively in the processing of chemicals, pharmaceuticals, cosmetics, foods, minerals and in wastewater treatment and sludge dewatering for industry and municipalities. RDVFs are extremely versatile and provide reliable, continuous liquid/solid separation with minimum operator attention and low maintenance.

Each RDVF filter is specifically designed to handle slurries that produce variations in cake thickness, moisture content and stickiness. The RDVF readily adapts to changes in feed rate and solid concentration and, at the same time, provides superior performance and high production rates.

Rotary Drum Vacuum Filter,Precoat Vacuum Filter Equipment,Rotary Vacuum Drum Filter Machine,Mining Rotary Drum Vacuum Filter

Changchun Meichen Machinery Co., Ltd. , https://www.meichenmachinery.com