The daily maintenance of artificial stone is simpler than natural stone. The basic content of its maintenance is to keep it clean, dry and prevent scratches. The specific content is:
1 Clean the dust and sand of the artificial stone ground in a timely manner; Place brown mats at the gates and important people to prevent pedestrians from treading the ground;
2 Regular brushing of protective agent, protective agent should be multi-functional fluorine silicone resin type product can be, do not have to do crystal hardening and waxing protection;
3 Some important slippery pedestrians or children shall be prohibited from performing construction works such as cement mixing on the ground with anti-slip agent.
4 prohibit the installation of hooks and other load-bearing institutions on the wall;
5 Acid-alkali cleaning agent not available: Synthetic stone contains more than 95% of natural marble or quartz sand, while marble is limestone, the main component is calcium carbonate, so non-neutral substances will destroy its luster. In order to achieve the cleaning effect, cleaning agents sold in the market often use alkaline substances with good cleaning effect as raw materials, and the long-term use results in a decline in the gloss of synthetic stones. It is recommended to keep away from non-neutral acid-base items such as dilute hydrochloric acid and tile cleaners;
6 Not available General floor wax: The general floor wax is an oily wax. The wax sticks with dust to block the capillary pores and form wax scales, causing the surface to be dirty in the future. It is recommended to use a special curing agent for stone to enhance the effects of gloss, slip, abrasion, and static electricity.
7 Can not cover the carpet for a long time: For a long time, the carpet is covered on the surface of the synthetic stone without replacing or ventilating the moisture. The artificial synthetic stone itself cannot be released from the pores, causing the artificial synthetic stone to have a high moisture content and causing the appearance of later Water spot. It is recommended that if carpets must be laid, choose to maintain the artificial synthetic stone without a prestige. Dust is best to use a vacuum cleaner, or electrostatic mop, stores and other public places should put a dust pad;
9 To immediately remove easily-stained materials: artificial synthetic stones with natural pores, dyeing material will penetrate the inside of the stone along the capillary and attached to the surface, resulting in unsightly stains, difficult to remove. When there is a contaminant, it should be cleared immediately;
10 To maintain ventilation and dryness: Always keep indoor air flowing. The use of curing agents can have a protective effect to prevent moisture condensation and mold growth;
11 Maintenance of the stone before its first use: Clean the dust and sand on the stone surface with clean water, mop and rag;
12Spray a special protective agent for stone with a spray can, and drag it with a mop to make it dry and ventilated;
13 Avoid direct contact of artificial stone surface with dust and damage. It is recommended that foot pads be installed at the population to reduce external gravel into the room;
14 If the stone surface is seriously worn out and cannot be restored by the above method, it must be polished or polished by a professional stone maintenance company;
15Because there are still other works to be carried out on the site, the surface of the stone should be protected with tape, cardboard or plywood when necessary to prevent the surface of the stone from being scratched, scratched or contaminated. The tape used for protection must not be directly affixed to it. Stone surface
16 Protection after construction. Wash the dust and sand on the surface of the stone with clean water first; clean with a low-speed sander with a neutral detergent. Pay attention to the too rough grinding opportunity to damage the bright surface of the synthetic stone. Finally, rinse with appropriate amount of clean water. After cleaning, blot dry and water, and use protective agent in time.
DongGuang Flag King manufacture Co.,Ltd was found in 2003,specilize in manufacturing and exporting wide range of flags, which can meet different requirement of client from all of world. Our company adopt the most advance flag Dyeing and Finishing technology, combine with the professional auto-silkscreen printing and specific hand-making printing methods, to produce National flags, Logo flag,Advertising banners& flags,Signal flags,Army flags,Hand flags,Car FLAG,Beach flag,Christmas flag ,etc. In addition,we also provide Alloy Tent and the pole for Car flag&Hand flag and other accessories . We equipped with advance automatic screen printing machine, inkjet screen making machine, autowashing & heatsetting machine which allow us to make the flag size up to 2*6 meters with 7 colors. Our factory occupy the area of 3000 square meters, employ about 200 works,provide the production daily capacity for 12000 ~15000 square meters. To protect the environment,we also build the water recycling system according to the standard of national environment protection. With the reputation of products quality and creditability since settled, we have made the project of supplying flags for: the 10th national Games of china, the world table-tennis Championships, 2004 Athens Olympic games, 2008 Euro-Championships, 2008 Beijing Olympic Games and Vancouver 2010 White Olympic Games. As a leading manufactory certificated by ISO9001 in china,we are known as the best quality, the reasonable price, and the fastest delivery. Now our products already exported to all around world ,such as:Germany , Sweden , Switzerland, Belgium, Iceland ,Canada, Australia ,USA,UK,UAE,HongKong an Macao. We will always assure of you to provide the best quality and service. Welcome to contact us,for any question, in any time!
custom logo flag,logo with flags，business logo flags，outdoor flags for flagpole，outdoor flagpole
FlagKing Flags Manufacturing Co.,Limited , https://www.cnflagking.com