A new development idea for auto parts remanufacturing at the end of 2008. Remanufacturing refers to the production process that restores used products to the same technical performance and product quality as the original products. Currently, auto parts products for remanufacturing trials are being launched. The range is tentatively scheduled for engines, gearboxes, generators, starters, and steering gears.
Recently, the National Development and Reform Commission and the State Administration of Industry and Commerce jointly stated that they would use the management and protection of auto parts remanufactured products. According to the pilot approach, auto parts remanufactured products should be clearly marked on the appearance of the product. The remanufactured parts must not be used for the production of new vehicles. The warranty standards should meet the same requirements as the original products, and the company should bear the warranty responsibility. It is understood that the current logo has been used first among 14 companies including the entire vehicle and pilot remanufacturing enterprises, including Huadu Global Automatic Transmission Co., Ltd. in Guangzhou. After the end of the auto parts remanufacturing pilot, it will be promoted throughout the country.
In order to promote the development of the auto parts remanufacturing industry, the National Development and Reform Commission has organized and designed the auto parts remanufactured product logos and filed them for protection at the State Administration for Industry and Commerce. It was formally released to the community and it began to be used, and six implementation standards were issued.
1. The logo consists of standard graphics and remanufactured Chinese and English texts, with ownership vested in the National Development and Reform Commission. Without the permission of the owner, no unit or individual may use, forge or revise the logo without authorization.
2. The signs are used first in the pilot enterprises of auto parts remanufacturing (referred to as the pilot enterprises) identified by the National Development and Reform Commission (see Annex 2). After the end of the auto parts remanufacturing pilot, it will be promoted throughout the country.
Third, auto parts and remanufactured products should be clearly marked on the appearance of the product logo. Products that cannot be marked due to size, etc., should be marked in the product packaging and product specification. Marks marked on remanufactured products should remain permanent. Remanufactured products sold prior to the release of the logo may no longer be marked.
Fourth, the mark only indicates that the product is a remanufactured product. It can be used alone to enlarge or reduce the use of the company's special maintenance sites, advertising and Internet sites or media, or it can be used in combination with the remanufactured company name, product name, and model number.
V. The National Development and Reform Commission and the State Administration for Industry and Commerce implement unified supervision and management of the use of signs. The local comprehensive management department for the development of circular economy and the administrative department for industry and commerce shall supervise and manage the use of signs in the areas under their jurisdiction in accordance with the division of responsibilities. For the remanufactured products with unlicensed use of signs and sales without signs, local industry and commerce administrative departments shall investigate and punish them in accordance with relevant laws such as the "Circular Economy Promotion Law of the People's Republic of China" and "Trademark Law of the People's Republic of China".
6. The sign is activated on the date of this announcement.
With regard to the change in the scope of use of the sign, the National Development and Reform Commission will notify the relevant authorities in another notice.
Since the issue of the remanufacturing of auto parts products, the relevant national authorities have given them high attention and policy support. The six standards announced above are also intended to regulate the auto parts remanufacturing industry and promote the healthy development of auto parts remanufacturing industry. The regulations clearly stated that remanufactured logos must not be used for new car production. In any case, the starting point for the state to support the remanufacturing of auto parts is good. According to statistics from the China Association of Automobile Manufacturers, the remanufacturing capacity of auto parts in 2010 was: Remanufacturing about 110,000 engines, remanufacturing about 60,000 transmissions, and manufacturing about 1 million sets of generators and starters; Only less than 2.5 billion yuan. Compared to remanufactured developed countries such as the United States, the gap is far between. A few years ago, the annual output value of US auto parts remanufacturing reached 50 billion U.S. dollars, forming an industry. The annual output value of China's remanufacturing industry is only more than 300 million U.S. dollars. Regardless of market demand or narrowing the gap with developed countries, it is necessary to develop the remanufacturing industry.
When it comes to here, we will inevitably have another idea in mind. After the remanufacturing process, parts and components may not be too different from new products. Some unscrupulous merchants will not do shoddy and remanufacturing products when new products are sold. To the user? At present, no one can be sure that there will not be such a situation, remanufacturing parts and components itself is to save energy, so that the use of limited resources for the purpose of secondary use, if there is a counter-productive, it is worth the candle.
Cnc Lathe Parts,Cnc Wood Lathe Parts,Cnc Lathe Machine Parts,Desktop Cnc Lathe Parts
Ningbo junfa CNC Equipment Co. Ltd. , https://www.intimecnc.com