High Strength Carbon Oxide Gas Reducer for Sale

Product Introduction

Because of the higher pressure in the gas bottle and the lower pressure required for gas welding and gas cutting, it is necessary to use a pressure reducer to reduce the high pressure gas stored in the cylinder to low pressure gas to ensure that the required working pressure remains stable throughout.

In short, the pressure reducer is a regulator that reduces high-pressure gas to low-pressure gas and keeps the pressure and flow of the output gas stable.


Product Display



Product Details Introduction

1) The regulator is applicable to industrial manufacturing,buiding and installation and so on.

2) The design of duplex gauge has provided convenience  for reading of gas cylinder pressure adn operating pressure.

3) The main body is forged and fashioned from high-quality brass and the upper cover is manufactured from aluminum alloy and spray finished,and for the 60mm pressure gauge,external relief valves are equipped and sintered bronze filters are installed at the air inlet.  

Different type and model regulators introduction

1.The body of the sj7-1o pressure reducer is made of brass.
The two-stage pressure relief system is basically similar in structure, and consists of valve jack, pressure regulating spring, elastic membrane device, pressure relief door and other components. The first stage decompression system is mainly used to automatically reduce the high pressure gas to medium pressure gas, to 2 MPa pressure, and then into the second stage decompression system.

In the secondary decompression system, when the pressure regulating screw is screwed, the pressure reducing valve is opened and closed in different degrees by means of the pressure spring, the elastic membrane assembly and the valve Jack rod, so as to adjust the pressure reducing degree of the oxygen supplied by the first decompression system or stop the gas supply.

2. The thread size at the inlet joint of Qd-1 type pressure reducer is 315.875mm, the inner diameter of the joint is 5.5mm, the inner diameter of the outlet joint is 6mm, and the flow rate is 80m3/h. The decompressor itself is also equipped with a high-pressure oxygen meter and a low-pressure oxygen meter, indicating the pressure in the high-pressure chamber (i.e. in the oxygen cylinder) and the low-pressure chamber (i.e. the working pressure). The range of the high pressure oxygen meter is. One 25MPa. The range of the low pressure oxygen meter is 0-v4mpao

When the qd-1 type decompressor is used, when the adjusting screw is turned clockwise, the decompression valve can be opened, and the hyperbaric oxygen flows into the low pressure chamber from the gap. As oxygen expands in the low pressure chamber, pressure decreases, that is, decompression.

3.sj7-10 double-stage pressure reducer inlet joint nut thread size is g15.875mm, joint diameter size is 7mm, outlet joint diameter size can be selected according to different needs 5mm or 9mm. The range of the high-pressure oxygen meter installed on the body is 0-25mpa, and the range of the low pressure oxygen meter is 0-4mpa.

Regulator specification:

pressure regulator with pressure and contents gauges 
gas service: Carbon dioxide
integrated safety valve and shut-off valve 
with screw connector 
connecton can be request
 
Product Details



Company Introduction



Linyi tongying import and export co., ltd was established in September 2016 with a registered capital of 1 million. Is a professional foreign trade company engaged in import and export trade, domestic and foreign trade, sino foreign joint ventures, cooperative production, re-export trade and other ways of business.

Mainly engaged in welding equipment and accessories, hardware machinery, labor insurance supplies, metal materials, wire and cable, chemical products, plastic products, electrical electrical materials, building materials, furniture, etc.; Import and export of goods and technologies.
       
At present, the company 's trade scale is expanding, customers all over the world, with good reputation by domestic and foreign customers trust, to promote the modernization of our country, promote economic and technological exchanges with countries around the world, and promote friendship with the people of all countries made a lot of positive work.Tongying  import and export co., ltd. all staff are dedicated to your service.

Our Service        

1  High quality products and competitive price
2  Free sample and meet your data requirement
3  Payment security
4  Fast delivery time and solve problems in shortest time
5  Export team has more than 10 years experience

FAQ:

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of delivery?
A: FOB, CFR, CIF.

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
 2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Contact Details

Address: a 169-170, Lunda International Area, Hedong, Linyi, Shandong, China 276000
Telephone:86-13853912908
Fax:86-539-2936036 Product Introduction

Because of the higher pressure in the gas bottle and the lower pressure required for gas welding and gas cutting, it is necessary to use a pressure reducer to reduce the high pressure gas stored in the cylinder to low pressure gas to ensure that the required working pressure remains stable throughout.

In short, the pressure reducer is a regulator that reduces high-pressure gas to low-pressure gas and keeps the pressure and flow of the output gas stable.


Product Display



Product Details Introduction

1) The regulator is applicable to industrial manufacturing,buiding and installation and so on.

2) The design of duplex gauge has provided convenience  for reading of gas cylinder pressure adn operating pressure.

3) The main body is forged and fashioned from high-quality brass and the upper cover is manufactured from aluminum alloy and spray finished,and for the 60mm pressure gauge,external relief valves are equipped and sintered bronze filters are installed at the air inlet.  

Different type and model regulators introduction

1.The body of the sj7-1o pressure reducer is made of brass.
The two-stage pressure relief system is basically similar in structure, and consists of valve jack, pressure regulating spring, elastic membrane device, pressure relief door and other components. The first stage decompression system is mainly used to automatically reduce the high pressure gas to medium pressure gas, to 2 MPa pressure, and then into the second stage decompression system.

In the secondary decompression system, when the pressure regulating screw is screwed, the pressure reducing valve is opened and closed in different degrees by means of the pressure spring, the elastic membrane assembly and the valve Jack rod, so as to adjust the pressure reducing degree of the oxygen supplied by the first decompression system or stop the gas supply.

2. The thread size at the inlet joint of Qd-1 type pressure reducer is 315.875mm, the inner diameter of the joint is 5.5mm, the inner diameter of the outlet joint is 6mm, and the flow rate is 80m3/h. The decompressor itself is also equipped with a high-pressure oxygen meter and a low-pressure oxygen meter, indicating the pressure in the high-pressure chamber (i.e. in the oxygen cylinder) and the low-pressure chamber (i.e. the working pressure). The range of the high pressure oxygen meter is. One 25MPa. The range of the low pressure oxygen meter is 0-v4mpao

When the qd-1 type decompressor is used, when the adjusting screw is turned clockwise, the decompression valve can be opened, and the hyperbaric oxygen flows into the low pressure chamber from the gap. As oxygen expands in the low pressure chamber, pressure decreases, that is, decompression.

3.sj7-10 double-stage pressure reducer inlet joint nut thread size is g15.875mm, joint diameter size is 7mm, outlet joint diameter size can be selected according to different needs 5mm or 9mm. The range of the high-pressure oxygen meter installed on the body is 0-25mpa, and the range of the low pressure oxygen meter is 0-4mpa.

Regulator specification:

pressure regulator with pressure and contents gauges 
gas service: Carbon dioxide
integrated safety valve and shut-off valve 
with screw connector 
connecton can be request
 
Product Details



Company Introduction



Linyi tongying import and export co., ltd was established in September 2016 with a registered capital of 1 million. Is a professional foreign trade company engaged in import and export trade, domestic and foreign trade, sino foreign joint ventures, cooperative production, re-export trade and other ways of business.

Mainly engaged in welding equipment and accessories, hardware machinery, labor insurance supplies, metal materials, wire and cable, chemical products, plastic products, electrical electrical materials, building materials, furniture, etc.; Import and export of goods and technologies.
       
At present, the company 's trade scale is expanding, customers all over the world, with good reputation by domestic and foreign customers trust, to promote the modernization of our country, promote economic and technological exchanges with countries around the world, and promote friendship with the people of all countries made a lot of positive work.Tongying  import and export co., ltd. all staff are dedicated to your service.

Our Service        

1  High quality products and competitive price
2  Free sample and meet your data requirement
3  Payment security
4  Fast delivery time and solve problems in shortest time
5  Export team has more than 10 years experience

FAQ:

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of delivery?
A: FOB, CFR, CIF.

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
 2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Contact Details

Address: a 169-170, Lunda International Area, Hedong, Linyi, Shandong, China 276000
Telephone:86-13853912908
Fax:86-539-2936036

Tuna Processing Line

Fish Canning Line,Tuna Processing Line,Tuna Canning Machine,Fish Processing Machines

Zhoushan Golden Pard Machinery Co., Ltd.   , https://www.fishprocessinglines.com