Guowu Dongfeng Tianjin sprinkler chassis configuration: 4×2 drive, D530 flat head one row semi-standard top cab, ISD180 50 electronically controlled common rail engine (WHTC), wheelbase 4700mm, charged heating cold starter, all steel 160L fuel Box, electronic accelerator pedal, muffler exhaust port side blowing, Φ395mm push diaphragm spring clutch, Dongfeng 6 gear DF6S900 gearbox, head speed ratio 7.967, the highest grade is overspeed, 4.5T front axle, 9T rear axle, The main reduction ratio is 5.286, the frame longitudinal beam section is 250×80×(7+4)mm, the number of leaf springs is 7/9+6, 9.00R20 radial tire, automatic adjustment arm, Dongfeng technology four-channel ABS, semi-floating driving Rear suspension, hydraulic mechanical flip, colorless laminated front windshield, electric glass lifter, central control door lock, channel instrument panel, with air conditioning, cruise system, remote throttle interface and PTO interface without device, pre- Stay in the vehicle terminal interface of the drive recorder compatible with BDS (Beidou)/GPS satellite positioning function.
Brief introduction of the performance of Guowu Dongfeng Tianjin sprinkler: suction stroke ≧ 7 meters, sprinkling width ≧ 14-16 meters, range ≧ 25-30 meters, water diversion time <5min, flow rate 60m3 / h. Front punching (spraying), back sprinkling, side spraying (shower), post-working platform, and installation of green sprinklers on the platform (cannon spray shape can be adjusted: straight flush, heavy rain, moderate rain, drizzle, fog, can Continuous adjustment, 360° rotation), equipped with fire-fighting interface, self-flow valve, filter screen, with self-priming and self-discharging function. Equipped with high-power special sprinkler pump, the pump can self-prime and self-discharge, install filter net, with fire-fighting interface, can enter water through fire hydrant, with self-flow valve, optional 20-meter green reel, can spray pesticide, tank metal paint. The tank has two kinds of elliptical and square round cans, which can be customized according to the requirements of users. The effective volume of the tank is 11.7 cubic meters. Tank dimensions (length × width × height) (mm): 5300 × 2250 × 1460; maximum volume: 14.5 square.
(This article comes from Xiagong Chusheng)
CNC Aluminum Parts,Machinery hardware parts processing,Customized aluminum plate processing,Mechanical Shaft Parts Processing of Aluminum Alloy
Dongguan Shangen Precision Metal Plate Co., Ltd. , https://www.shangenmetal.com