Distilled Water Heating Tank with Mixing Device

Instruction of the Mixing Tank:

1). Widely used in making resins, adhesives, paints, cosmetics, pharmaceuticals and other chemical productions.
2). Mechanical seal.

3). Inverter for frequency control.
4). Jacketed type, outer-pipe type, outer-inner-pipe type.
5). Heated by oil, water, steam or electric.

6). Equipped with distillation column, condenser, water separator, collecting cans, filters ect.

7). Supply complete production line, as well as productin technology.

 

Tank configuration (customized):
1.Quick opening manhole
2. Various types of CIP
3. Anti butterfly and dirt air vent
4. Tubular or triangular legs
5. Inlet and outlet valve
6. Thermometer
7. Ladder
8. Jacket (Miller jacket or hollow jacket)
9. PU insulation layer
10.Mixer
11. Level gauge and level controller
12.Anti-vortex board
13.Sanitary sample valve








Have different kinds of agitators:
1, Bottom magnetic agitator with propeller impeller, speed from 50-400rpm or 50-800rpm. this kind of agitator is mixing thin viscosity , such as eyedrop, injection, CIP liquid, water, etc.
2, Top mechancial agitator with propeller impeller, speed at fix 71rpm or adjustable 20-200rpm or special requirement. this kind of agitator is mixing syrup, injection, blood, oral liquid, culture media, etc.
3, Top mechanical agitator with anchor or frame impeller, speed is from 10-70rpm. it is mixing higher viscosity , such as sediment or viscosity oral liquid, etc.
4, Top emusification homogenizer, speed max 2900rpm for small vessel, 1480rpm for bigger tank. this kind of agitator is mixing most high viscosity , such as suspension, oil, fat emulsification , etc.
5, Bottom emusification homogenizer, speed max 2900rpm for small vessel, 1480rpm for bigger tank. this kind of agitator is mixing most high viscosity , such as suspension, oil, fat emulsification , etc.

Instruction of the Mixing Tank:

1). Widely used in making resins, adhesives, paints, cosmetics, pharmaceuticals and other chemical productions.
2). Mechanical seal.

3). Inverter for frequency control.
4). Jacketed type, outer-pipe type, outer-inner-pipe type.
5). Heated by oil, water, steam or electric.

6). Equipped with distillation column, condenser, water separator, collecting cans, filters ect.

7). Supply complete production line, as well as productin technology.

 

Tank configuration (customized):
1.Quick opening manhole
2. Various types of CIP
3. Anti butterfly and dirt air vent
4. Tubular or triangular legs
5. Inlet and outlet valve
6. Thermometer
7. Ladder
8. Jacket (Miller jacket or hollow jacket)
9. PU insulation layer
10.Mixer
11. Level gauge and level controller
12.Anti-vortex board
13.Sanitary sample valve








Have different kinds of agitators:
1, Bottom magnetic agitator with propeller impeller, speed from 50-400rpm or 50-800rpm. this kind of agitator is mixing thin viscosity , such as eyedrop, injection, CIP liquid, water, etc.
2, Top mechancial agitator with propeller impeller, speed at fix 71rpm or adjustable 20-200rpm or special requirement. this kind of agitator is mixing syrup, injection, blood, oral liquid, culture media, etc.
3, Top mechanical agitator with anchor or frame impeller, speed is from 10-70rpm. it is mixing higher viscosity , such as sediment or viscosity oral liquid, etc.
4, Top emusification homogenizer, speed max 2900rpm for small vessel, 1480rpm for bigger tank. this kind of agitator is mixing most high viscosity , such as suspension, oil, fat emulsification , etc.
5, Bottom emusification homogenizer, speed max 2900rpm for small vessel, 1480rpm for bigger tank. this kind of agitator is mixing most high viscosity , such as suspension, oil, fat emulsification , etc.