1, Dimension: 101X53mm, 4 lateral holes with 2 grooves;
2, Thickness: 4.0mm-4.8mm;
3, Both smooth and rough surface available.
Our clutch button products are suitable for Mack and Tata clutch disc, Leyland tractor clutch disc and some cars, due to the low wearing rate, suitable friction coefficient and the proper hardness, clutch buttons products is replacing part of the clutch facing market, especially in the heavy duty truck market, customers who are using our buttons found it was very economical, as our button is low wear rate, and can compare with the US made clutch button.
We have three clutch button formula currently, one is our regular formula, smooth finish and medium property, another is the low wear formula with rough finish, the third one is a new formula, it's developed with the assistance of the oversea engineer, and this button is following Miba appearance and similar to its finish and property, it is supplied to our OE customers, due to its low cost and excellent property, it is very popular among our customers from South America and India.
One of our formula, the property as follows:
1) Friction coefficient: 0.49-0.58(regular)
Wearing rate: 0.05-0.18(regular).
2) Surface Hardness of button: BHN 25+/-5.
3) Bend test result: Passed, no bearing area on the back plate.
Â
Tower Crane cabin is the control center of the crane and is attached to the slewing unit. In order to get to the tower crane cab, the operator must climb a series of ladders within the mast.
The movement of the tower crane is controlled from the operator's cabin. Within the tower crane cabin, you'll find the operator's chair with joystick controller, electronic monitoring devices, and communication systems. Many cabins come with climate control to ensure a comfortable work environment. The Operator Cabin for Tower Crane is part of the slewing assembly.
A cabin for a tower crane is a small enclosed space located at the top of the tower crane Mast Section or tower crane jib. It is where the crane operator sits and controls the crane's movements and operations. The tower crane cabin is typically made of steel or aluminum and is designed to provide a safe and comfortable working environment for the operator. It is equipped with controls, instruments, and communication systems that allow the operator to maneuver the crane, lift and lower loads, and communicate with other personnel on the construction site. The cabin is often equipped with heating and air conditioning systems to ensure the operator's comfort in various weather conditions. Safety features such as guardrails, harness attachment points, and emergency controls are also included in the cabin design to protect the operator in case of accidents or emergencies.
Tower Crane Cab,Tower Crane Cabin Chair,Tower Crane Operator Cabin, Operator Cabin for Tower Crane,Driver's Cabin for Tower Crane
SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sczenghui.com