First, the selection of screw pump speed
Screw pump flow and speed into a linear relationship, relative to the low-speed screw pump, screw pump with high speed although it can increase the flow and lift, but the power was significantly increased, high speed accelerated wear between the rotor and stator, must make Early failure of the screw pump, screw rotor and high-speed fixed rotor length is very short, easy to wear, thus shortening the life of the screw pump.
Through reducer or stepless speed regulation mechanism to reduce the speed, the exploration speed maintained at a reasonable range of three hundred revolutions per minute, and high-speed operation of the screw pump, the service life can be extended several times.
Second, the quality of screw pump
Now on the market more types of screw pumps, relatively speaking, the imported screw pump design, excellent material, but the higher prices, some services are not in place, parts prices, ordering a long period of time, may affect the normal production run.
Most of the domestic production of imported products imitation, product quality varies greatly in the choice of domestically produced products, considering its cost-effective time, the choice of low speed, long lead, transmission parts of good quality, long life rating of the product.
Third, to ensure that debris does not enter the pump body
Solid impurities mixed in the wet sludge will damage the rubber material stator of the screw pump. Therefore, it is very important to ensure that the sundries do not enter the cavity of the pump. Many sewage plants add a shredder before the pump and some install Grille device or filter, block debris into the screw pump, grill should be promptly cleared to avoid clogging.
Fourth, to avoid broken material
Screw pump is never allowed to run in the case of broken material, once occurred, the rubber stator due to dry friction, instantaneous heat generated and burned, so the grinder intact grille smooth is one of the necessary conditions for the normal operation of the screw pump is In this case, some screw pumps are still installed in the pump body off material shutdown device, when there is a broken material, due to its self-priming screw pump features, the cavity will have a vacuum, the vacuum device will stop the screw pump operation.
Fifth, to maintain a constant export pressure
Screw pump is a positive displacement rotary pump, when the outlet is blocked, the pressure will gradually increase, so that the pressure exceeds the predetermined value. At this time the motor load increased dramatically. Transmission machinery related parts load will exceed the design value, severe motor burn occurs, the transmission parts broken. In order to avoid damage to the screw pump, generally installed at the outlet of the screw pump bypass relief valve to stabilize the outlet pressure to maintain the normal operation of the pump.
Iron-based alloy powder is commonly used in plasma transfer arc welding (PTAW) due to its excellent mechanical properties and high resistance to corrosion and heat. This type of powder is typically composed of iron as the base metal, along with various alloying elements such as nickel, chromium, molybdenum, and tungsten.
The specific composition of the iron-based alloy powder may vary depending on the desired properties and application requirements. For example, adding nickel can increase the strength and toughness of the weld, while chromium enhances the corrosion resistance. Molybdenum and tungsten are often added to improve the high-temperature strength and creep resistance of the weld.
Iron-based alloy powders for PTAW are available in various particle sizes, typically ranging from a few micrometers to several hundred micrometers. The powder is usually fed into the plasma arc through a powder feeder, which ensures a controlled and consistent supply of powder during the welding process.
During PTAW, the powder is melted and deposited onto the workpiece, forming a weld bead. The high energy plasma arc provides the heat necessary to melt the powder and the base metal, creating a strong and durable weld joint.
Overall, iron-based alloy powder for plasma transfer arc welding offers excellent weldability, high mechanical properties, and resistance to corrosion and heat, making it suitable for a wide range of applications in industries such as aerospace, automotive, and power generation.
Fe Alloy Powder,Stainless Powder,High Temperature Powder,Iron Base Pta Welding Powder
Luoyang Golden Egret Geotools Co., Ltd , https://www.egretgeotools.com