“India's imports of fasteners (customs code: 7318) from 2009 to 2010 were US$289.372 billion, and total fastener imports from 2010 to 2011 were US$376.769 billion, a year-on-year increase of 28.23%.â€
India's imports of fasteners (customs code: 7318) from 2009 to 2010 were US$289.372 billion, and total fastener imports from 2010 to 2011 were US$376.769 billion, a year-on-year increase of 28.23%. Among them, the increase in import of other threaded wood screws was the largest, which was a year-on-year increase of more than 200%. Followed by threaded screw hooks and threaded rings, an increase of 139.66%, again unthreaded split pins, an increase of 83.34%.
India's fastener exports from 2009 to 2010 were US$187.751 billion, and total exports from 2010 to 2011 were US$25.135 billion, an increase of 40.49% year-on-year. Among them, the increase in the output of the retaining ring was the largest, which was a year-on-year increase of 248.92%, followed by the threaded screw hook and the threaded ring, which increased by approximately 132.91% compared with the same period of last year. Again, the non-threaded spring washers and other lock washers increased by 132.64%.
India's imports of fasteners (customs code: 7318) from 2009 to 2010 were US$289.372 billion, and total fastener imports from 2010 to 2011 were US$376.769 billion, a year-on-year increase of 28.23%. Among them, the increase in import of other threaded wood screws was the largest, which was a year-on-year increase of more than 200%. Followed by threaded screw hooks and threaded rings, an increase of 139.66%, again unthreaded split pins, an increase of 83.34%.
India's fastener exports from 2009 to 2010 were US$187.751 billion, and total exports from 2010 to 2011 were US$25.135 billion, an increase of 40.49% year-on-year. Among them, the increase in the output of the retaining ring was the largest, which was a year-on-year increase of 248.92%, followed by the threaded screw hook and the threaded ring, which increased by approximately 132.91% compared with the same period of last year. Again, the non-threaded spring washers and other lock washers increased by 132.64%.
Insert is a general term. In the mold, it refers to the irregular mold parts used in the mold, which plays a role in fixing the space between the template and filling the template.
Inserts can be square, round, or flat. Like all mold accessories, the precision requirements are very high. Generally there is no finished product, customized according to the needs of the mold.
Types of inserts: pins, blocks, columns, rings, etc.
Material: 1.2343, 1.2344, SKD61, SKH51, 1.3343, ASP23, SKD11, etc.
Hardness: above 45-60HRC
Standard accuracy: ± 0.01mm
Inserts are widely used in plastic molds
Gate Inserts,Mold inserts,Insert Mold Parts,Connector Mold Parts
Dayue Precision Technology (Dongguan) Co., Ltd. , https://www.dayuechn.com