At about 4 pm on November 26th, a chemical plant exploded in Dongzhuang Town, Xiuyu District, Putian City, Fujian Province. Nearby residents reported that the area near the site of the incident was strongly felt and the smoke was thick. According to the latest information from the Propaganda Department of Putian City Committee, the incident was caused by the fire of the heat transfer oil pump in the boiler room of Zhongjin New Materials Co., Ltd. The fire has been extinguished and no one has died.
On November 25th, the Fujian Provincial Environmental Protection Agency notified the province of the fourth batch of environmental safety hazards in 2015. The chemical plant was named because it did not install denitrification facilities and ordered that it be quickly rectified.
At 4:17 pm on the 26th, the heat pump of the boiler plant of the chemical plant caught fire. After more than one hour of fighting, the open flame was extinguished at approximately 7:00 pm. The accident did not result in the death of the person. The cause of the fire was under investigation.
Fujian Zhongjin New Material Co., Ltd. has a registered capital of RMB 300 million and was established on April 7, 2013. Its business scope includes the production of differentiated chemical fiber and other high-tech chemical fiber and polyamide (excluding hazardous chemicals and monitoring chemicals). Sales; storage of chemical fiber products (excluding hazardous chemicals and monitoring chemicals) and sales of lactams. In 2013, the chemical plant started smoothly and was rated by the local media as one of the "big events" of Putian economy.
Most of the chemical plant production is toxic and harmful gases or combustible gases. Therefore, safety is very important in production. Combustible gas explosion meter manufacturer Henan Chicheng specializes in the production of toxic and harmful gas alarm.
Aluminum Deep Drawing Sheet is a kind of Aluminum Sheet suitable for deep drawing process.It has wide applications.The advantage of aluminum deep drawing sheet is as follows:
1. Easy to process.
The results show that the casting aluminum alloy with good casting property or deformation aluminum alloy with good processing plasticity can be obtained by adding certain Ba Au Du element.
2. Good conductivity and thermal conductivity.
The electrical and thermal conductivity of aluminum is second only to silver, copper and gold.
3. The density is small.
The density of aluminum and aluminum alloy is close to 2.7 g / about 1 / 3 of that of iron or copper.
4. High strength.
The strength of aluminum and aluminum alloy is high. The matrix strength can be strengthened by cold working to a certain extent, and some brands of aluminum alloy can also be strengthened by heat treatment.
5. Good corrosion resistance.
The surface of aluminum is easy to produce a dense and firm protective film of Al2O3, which can protect the substrate from corrosion.
3003 Aluminum sheet,Aluminium Alloy Sheet,3003 H14 Aluminum Sheet,Deep Drawing Aluminium Sheet
Trumony Aluminum Limited , https://www.szaluminumsheets.com