Package content:
1 x Diesel Fuel Water Oil Car Transfer Pump
1 x English Instruction
Product   Specification :
Product Description:
12V Submersible Transfer Pump Use w/ Diesel, Kerosene,Water, Oil, Salt Water 12 Litres/Min (12 LPM)
Pump diameter: Width approx. 38 mm / 1.5in
Pump length: approx. 11.2 cm / 4.4in
Lift:2 meters
Largest current: 1.5 Amp
Power Cord Length:approx. 3m / 118.1in
Rev:Â 8500r.p.m
Power cord length is 3 meters, the hose outlet diameter is 16 mm= 0.6in. Pipe not included.
Make sure the power supply voltage are consistant with pump voltage. The voltage tolerance is ± 5%, please notice the positive and negative.
-100% Brand new and high quality. Stability, small, lightweight , easy to carry and install. Stainless steel filters and screw thread interface, easy to disassemble, repair and replace. Fits for water, diesel fuel, kerosene.
-Suits for harvesters, large farm machinery, construction machinery, big wheel tractor and other vehicles which is inconvenient to refueling.
-It is strictly prohibited pumping gasoline, alcohol and other flammable fluids! It can not be no-load operation and dry pumping.
- Pump should be intermittent work (that is, no more than 20 minutes to use it each time, stop for 10-15 minutes and then continue to work), be careful not to work long hours.Used for harvesters, large farm machinery, construction machinery,
 big wheel tractor and other field operations inconvenient refueling vehicles and can not reach the gas station refueling equipment and machinery.
1. The pump with aluminum shell, increasing the thickness of the housing, making the housing more solid, can also prevent the housing rust or rot.
2. In the bottom of oil pump with stainless steel filter, to make out of diesel (or water) cleaner. Bottom of the filter with a threaded connection, easy disassembly, repair and replacement, which can reuse.
3. After use of the pump, it should be timely to present pump from the oil (or water) out.
4. This pump should take a good-owned oil hose firstly when pumping, and then put the pump completely into the clear oil (or water).
WARNING:
- Gasoline, alcohol and other flammable liquids are strictly prohibited to use this pump! Pump can not be opeated with no-load or dry pumping.
- Pump should be intermittent work (that is, no more than 20 minutes to use it each time, stop for 10-15 minutes and then continue to work), be careful not to work long hours.
- Make sure that if the power supply voltage same to pump voltage label, which voltage tolerance is ± 5%, and be attention to positive and negative.
Â
Shiyan Xiangren Industry & Trade Co.,Ltd supply Genuine sensors manufactured in China and OEM sensors manufactured by ourself, they are used for CUMMINS ISF2.8 ISF3.8 ISG engine models, our Genuine Cummins Spare parts and OEM spare parts are high quality and very competitive price. we would like to wholesale sensors and manufacture sensors form customer's requestion(*Aftermarket Sensor).
Cummins Sensor,Position Sensor,Temperature Sensor,Speed Sensor,Aftermarket Sensor
Shiyan Xiangren Industry & Trade Co., Ltd. , http://www.syxrgs.com