1. When the cooling system changes seasons in winter, it is necessary to clean and maintain the garbage truck. After the garbage truck runs normally for six to eight months, it must be cleaned once. If the temperature is too high or leaks, it must be cleaned. Prevent corrosion, leakage of seals and water tanks, and replacement of old coolant.
2. The gearbox usually travels 800 to 1000 kilometers per garbage truck and needs to clean the gearbox. If the garbage truck's transmission slips, the temperature is too high, the shift is slow, and leakage occurs, it should be cleaned and maintained. Clean up oil and impurities to maintain normal elasticity of seals and o-rings, increase power output, and replace old transmission oil.
3. The brake system garbage truck needs to be cleaned and maintained every 800 kilometers. Clean up the harmful substances inside the system, avoid system instability due to temperature instability, prevent brake fluid deterioration, and replace them in time.
4. Lubrication System The lubrication system plays a role in lubricating the various components of the garbage truck, avoiding excessive wear and causing premature aging. Under normal circumstances, garbage trucks must be cleaned every 5,000 to 10,000 kilometers. If there are excessive noises in the engine of the garbage truck, the power is insufficient. When the water temperature is too high, it must be cleaned and maintained. Usually pay attention to the internal cleaning of the engine oil and debris to prevent engine parts wear, thereby increasing its working efficiency and increase the service life.
5. Fuel system Under normal circumstances, when the garbage truck travels 800 to 1000 kilometers, it is necessary to clean and maintain its fuel system. If the engine is in a state of shock or acceleration, and there is insufficient power or fuel consumption, it must be cleaned and maintained. Clean up dirt and carbon deposits inside the system to reduce wear and keep the engine in good working condition.
6, the power system garbage truck driving every 1000 to 2000 kilometers, it is necessary to clean and maintain its power system. If there is leakage in the steering system of the garbage truck, the accessories of the power steering machine must be replaced to clean the internal impurities. If noise occurs, the brake fluid must be replaced.
The machine is used for punching connecting holes at both ends of the scaffold vertical pole, it can punch four holes at one time, and it can also ensure the accuracy of the hole position.
Description of cuplock scaffolding automatic Punching Machine
Pipe quantity: punch one pipe at one time
Guarantee time: 1 year
MOQ: 1 set
OEM service: offered
Payment: T/T. L/C
Delivery: Tianjin port
FAQ:
Q: Can you customize the machine according to our workpiece requirement?
A:Yes, we can design the machine after you give us the technical drawing.
Q: How about payment terms?
A: 30% TT as deposit, 70% TT paid before shipment or against B/L copy.
Q: Installation and commissioning?
A: We will send our engineer for installation and commissioning
Q: Do you have some videos to show how the machine works?
A: Yes, we can provide some videos for reference.
Cuplock Scaffolding Automatic Punching Machine
Cuplock Scaffolding Automatic Punching Machine,High Speed Cross Brace Punching Machine,Multifunction Scaffolding Punching Equipment,Multifunction Scaffolding Punching Machine
RENQIU JINSHI WELDING MACHINE CO., LTD , http://www.scaffoldwelder.com