300ton Injection Molding Machine with Servo Motor

Posted on

  • Model NO.: LSF-308
  • Structure: Horizontal
  • Plasticizing Way: Screw Type
  • Automation: Automatic
  • Certification: CE, ISO9001:2008
  • Tie Bar Sizes: 630*630mm
  • Injection Rate: 177-239g/S
  • Machine Sizes: 6.15*1.56*2m
  • Specification: CE, SGS, ISO9001
  • HS Code: 8477101090
  • Type: Preform Injection
  • Plastic Type: Thermosetting
  • Clamping Way: Hydraulic & Mechanical
  • Computerized: Computerized
  • Shot Weight: 830-1136gr
  • Mold Height: 200-630mm
  • Injection Pressure: 193-412MPa
  • Trademark: LONGSHUN
  • Origin: Changzhou Jiangsu China
300ton injection molding machine with servo motor

Plastic injection machines we build clamping force from 680 to 8800KN, shot weight from 83 to 4390gr, which can meet all kinds of plastic products production requirements.
 
Equiped with servo motor, which energy saving by 60% in average ,with longer working life (low oil temperature),low noise ,high precision (close looped system ).
 
Welcome contact us for more details and professional services.
 
Technical specifications;
 
 
 
 
INJECTION UNIT
Unit LSF-308
A B C
Screw Diameter Mm 60 67 70
Screw L/D Ratio L/D 21.6 19.8 18.6
Short Size Cm3 918 1145 1250
Injection weight G 830 1030 1136
Injection Rate g/s 177 206 239
Plasticizing capacity g/s 41 49 57
Injection Pressure Mpa 193 158 142
Screw Speed Rpm 0-185
 
 
 
 
CLAMPING UNIT 		Clamp Force KN 3080
Space Between Tie Bars mm 630*630
Toggle Stroke mm 590
Max. Mold Height mm 630
Min. Mold Height mm 200
Ejector Stroke mm 160
Ejector Tonnage KN 62
Ejector Number P 9
 
 
OTHERS 		Max. pump Pressure Mpa 16
Pump motor powder Kw 30
Heater Power Kw 18
Machine Dimension(L*W*H) M 6.15*1.56*2
Machine Weight T 10.2

Features: 
1) LCD computer control with big display screen 
2) Hydraulic double proportional valve 
3) Hard chrome plated high tensile strength steel tie bars 
4) Generous space for fitting large moulds 
5) Large opening stroke 
6) Two position transducers to control Clamping and Injection 
7) Four stages of injecting, independent velocity and pressure control 
8) Hydraulic mould height adjustment device 
9) Screw cold-start prevention device 
10) Melt decompression control 
11) Screw back pressure control 
12) Multiple hydraulic ejection 
13) Differential high speed clamping 
14) Centralized lubrication system 
15) Low pressure mould protection device 
16) Mechanical safety interlock 
17) Double electrical safety interlock 
18) Oil return filter 
19) Oil tank with inner stainless steel container

Servo Controller Part:

1. High Precise Control

The servo system can control the machine's pressure, speed & location precisely, make sure that the error of accurate repeatability precision for the shot measurement is <0.3%

2. High sensitive response

Because the motor vector is matched with the controller accurately, it only takes 0.5sec. inputing the number from 0 to max. Compared with other traditional hydraulic injection molding machine, AF series is more faster in speed with shorter cycle time and high efficient in production

 

3. Energy Saving

Overall efficiency is 10% more & driving capacity is 18% more than common machine. This series can save 30-80% energy, and achieve first-class energy efficency

 

Services:

24 hours technical support by email.

one year guarantee

Calling or door to door services

The fluorinated mica crystals have very good high temperature resistance, corrosion resistance and light transmission properties, and can work for a long time at a high temperature of 1100°C.

No reaction occurs with strong acids and alkalis; complete light transmittance (pure and transparent). The natural mica plates traditionally used in the observation window of high-pressure boiler water level gauge are all brown, and the light transmittance is not good, and the temperature resistance is in the range of 200-700°C, especially the corrosion resistance is poor. The boiler steam drum water in thermal power plants contains alkali. After reacting with natural mica and alkali, it is washed with hot air and hot water, and it is prone to fluffing, scaling, and being broken. In the short term (about 1-2 months), the water level is not clearly understood. After being broken, it can easily cause leakage. The fluorite mica does not react with the acid-base solution, and does not react with water in the hydration reaction, so that it does not form a layer, does not scale, and does not break. In the long-term (2 to 3 years) scouring of high-temperature and high-pressure water (including acid and alkali), the original clarity and transparency can still be maintained. In China, it has been widely applied to the observation window of steam boiler water level gauge in high-pressure boilers of thermal power plants. It has also been selected by Japanese BBK company and NDK (Colin) company for the observation window of high pressure boiler drum level gauge.

High Temperature Mica Gasket

High Temperature Mica Gasket,High Temperature Gaskets,High Temperature Gasket Material,High Temperature Insulation Materials

Changchun City Taiyuan FluorphlogopiteCo. Ltd. , http://www.micaslice.com